Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Antenna coil for Westinghouse WR-217
#2

Hi 45 Philcodon,

Your options depend on a few things.
Are you going for an original look?
Are you looking to have the radio work on the "Police" Band?
If neither, you may get away with connecting a loopstick or old school loop antenna between the 6A7 grid and the AVC Line. 

This coil does not lend itself to rewinding, based on construction.  The coil is above chassis but hidden in the WR217 cabinet. This chassis is also used in an Emerson mini-tombstone and would be more visible there.  Several Emerson AC-DC and transformer powered radios have a similar band and change frequencies by grounding a tap on the coil.

Resistance may not have much bearing on this, but if need be, I will disassemble the radio again and make measurements.

The "Police" Band on this radio covers from 1.8-4.2 MHz.  I am not sure of the current activity but I believe that 160M and 80M Ham bands and some marine activity occurs on this band.  Active HAMs and SWLs in this Phorum may be helpful.

This must be a more popular radio than I thought,  This is the 3rd thread I have seen on this model tonight.

Best Regards.

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis

Best Regards, 

MrFixr55


Messages In This Thread
RE: Antenna coil for Westinghouse WR-217 - by MrFixr55 - 07-24-2020, 11:14 PM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Philco 91 Tuning Condenser
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM
6TPZ and 5TPO Radio Help
This is what I meant. I would start from touching Test Point 12 on the sch. See if you hear hum.morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM

[-]
Who's Online
There are currently 8921 online users. [Complete List]
» 2 Member(s) | 8919 Guest(s)
AvatarAvatar

>