1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Linear Mode
60-505 no audio
Ram
Junior Member
**
Posts: 13
Threads: 2
Joined: Feb 2011
#3

02-14-2011, 09:23 PM
Have a meter, will test the resistance of the coils, didn't think of coils.
Cap's don't have any outward bad indications, such as swelling, leaking, or cracks or even discoloration. All have both ends with the wires still attached as well. Took a chance powering up with the cap's. Will have to test them too.

Have been e-mailing Mark, he does not stock the part number to replace my dial. Will have to drill the rivets and scan into computer for re-construction then make new decal myself.

Have looked at Retro-Tronics previous to posting. Have only seen back boards. Will e-mail them and see if they have a speaker board or even be able to just sell some hard stock.

And that stuck tube, I don't want to use too much force on that to trash the socket as you have mentioned. Will have to work it some more and hope it starts to move.

Thanks,
Gary
Find
« Next Oldest | Next Newest »
Thread Closed


Messages In This Thread
60-505 no audio - by Ram - 02-13-2011, 03:00 PM
Re: 60-505 no audio - by Ron Ramirez - 02-14-2011, 10:29 AM
Re: 60-505 no audio - by Ram - 02-14-2011, 09:23 PM
Re: 60-505 no audio - by Ram - 02-21-2011, 06:29 PM
Re: 60-505 no audio - by Ron Ramirez - 02-22-2011, 09:54 PM
Re: 60-505 no audio - by Ram - 02-24-2011, 09:59 PM
Re: 60-505 no audio - by Ron Ramirez - 03-03-2011, 09:25 AM
Re: 60-505 no audio - by Ram - 04-05-2011, 07:48 PM
Re: 60-505 no audio - by Ram - 04-09-2011, 07:37 AM
Re: 60-505 no audio - by 7estatdef - 04-09-2011, 08:59 AM
Re: 60-505 no audio - by Ram - 04-19-2011, 09:52 PM
Re: 60-505 no audio - by 7estatdef - 04-20-2011, 09:00 PM
Re: 60-505 no audio - by Ram - 04-30-2011, 08:01 PM
Re: 60-505 no audio - by 7estatdef - 05-01-2011, 02:34 PM
Re: 60-505 no audio - by Ram - 05-02-2011, 07:52 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
The speaker table error?
G  10-1/2"       65, 76, 87, 95 Push-Pull 45's 2766 0.7 550 3200 H   10-1/2"    77, 96 Push-Pull...morzh — 09:26 PM
A Marconi model 86
I have a Stromberg, one of the early ones, seems early 30s. This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM
A Marconi model 86
A backbreaker.....PaulPaul Philco322 — 08:12 PM
A Marconi model 86
>>What a behemoth! A Juggernaut.morzh — 07:47 PM
Philco 70 antenna lead
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM
A Marconi model 86
:e_biggrin: What a behemoth!  I hope the final result is as much a quality sounding example!  Keep us posted on your pro...GarySP — 07:32 PM
A Marconi model 86
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM
Philco 70 antenna lead
Yes, that wire will not pick up much interference as routed - the RF at that level won't be affected, and if you have st...radio1 — 07:26 PM
Philco model 60
I'm also a member of MARC. Did you attend the Vintage Electronics Expo in Waterford, MI last month? That's where I got...GarySP — 07:22 PM
A Marconi model 86
Dan Double conversion is using two IF converters instead of one. This improves the image response. morzh — 07:15 PM

[-]
Who's Online
There are currently no members online.

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration