Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 38-14 Radio Tube Compatibility and Sources
#13

OK. I have to be a bit blunt here.

Megan, a piece of advice:
38-14 is not the best radio to start learning from. It is an AC/DC set. There is exact same radio in exact same case, 38-15 which is an AC only set that has a power transformer that makes it that much safer to work on. 38-14 has no transformer and so it puts you under the Mains potential when working on it.
So. I take it, you are not yet a very experienced electronics person, so: if you are serious about it, get at least an isolation transformer. Let alone the fact that if the radio works you will have to align it and for this you will be touching stuff on it.
Oh....and you will need some things to align it with, meaning you will have to buy some testing equipment. Of course there are shortcuts....but then they are shortcuts.

Best of luck.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Tube Compatibility - by Inkthinker2 - 11-19-2020, 04:36 PM
RE: Philco 38-14 Radio Tube Compatibility and Sources - by morzh - 11-19-2020, 09:35 PM
Electrolytic, Film Caps, Isotap - by Inkthinker2 - 12-16-2020, 11:14 PM
Great Information - by Inkthinker2 - 12-17-2020, 01:43 PM



Users browsing this thread: 6 Guest(s)
[-]
Recent Posts
Philco 49-1040
Hello bob, that underside looks like it is all original ! Sincerely Richardradiorich — 02:07 AM
Philco 49-1040
Oh yes, many bumblebees and loktal tubes. The cutout is for the speaker.  Here's a photo from a different set. Bob Andersen — 12:59 AM
Philco 49-1040
Bob; Looks like another "Bumble Bee" special, like my Brand Z T.O radios. Is that section they took out of ...Arran — 12:19 AM
Philco 49-1040
Hello Bob, You are like the home for lost tv's like how people bring pets home ! Sincerely Richardradiorich — 12:00 AM
Philco 49-1040
I thought I had an arrangement to restore this set for a customer but his wife said heck no.  Instead, he gave it to me....Bob Andersen — 10:29 PM
Philco 46-480 Electronic Restoration
I kept working on reassembly this week. I wasn’t able to solder for a few days while it was too cold (single digit low t...jrblasde — 09:27 PM
Atwater-Kent 84, restoration.
Well, powering it up would be too good to be true, and I had that feeling. Before I did, I decided to check the coils...morzh — 06:02 PM
An attempt to remove the Field Coil from a G speaker
Thanks Chas, sure will give it a look!morzh — 03:39 PM
An attempt to remove the Field Coil from a G speaker
Mike, Lookup  murrayatuptown on ARF. Seems he has a dilemma with surplus field coils. Could get lucky and have what y...Chas — 01:26 PM
Atwater-Kent 84, restoration.
Hello Mike, I have not checked to see if my console has a fuse or not and far as sets go I have early 30s General Motor...radiorich — 11:25 AM

[-]
Who's Online
There are currently no members online.

>