Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Stewart Warner 9001-F
#1

This radio was restored by somebody else about 8years ago and has played well up to now. I’m now getting a “squeel” or howl on the stations. It’s worse when the radio is cold and just minimal after the set has warmed up.  I’ve tried a different 6sa7 and 6sf7 tubes. The howling was less after replacing the 6sf7 tube but not completely gone. The noise also goes away when I hold a loop antenna up next to the radios loop antenna. Am I missing something simple?  
I think my next step is pulling the chassis and check all the resistors and test all the tubes and visually inspect everything else.


Messages In This Thread
Stewart Warner 9001-F - by Tucker - 11-29-2020, 01:31 PM
RE: Stewart Warner 9001-F - by Radioroslyn - 11-29-2020, 02:07 PM
RE: Stewart Warner 9001-F - by Arran - 11-30-2020, 06:52 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
New member
Hello jeff, Welcome aboard ! Sincerely Riochardradiorich — 06:53 PM
New member
Good picture, When was it taken? You don't look in it like a guy who has a teenage son :)morzh — 06:13 PM
New member
Love the pic! I'm southern IL, so wouldn't be much help and Bob Anderson is very good on those, but lives in Chicago are...TV MAN — 05:25 PM
Philco 40-120C Filament Wiring
:thumbup:klondike98 — 04:56 PM
Philco 40-120C Filament Wiring
With these values I think you are OK; the Cmax for this tube is 40uF. Your Vbb could rise a bit, but probably not too mu...morzh — 04:53 PM
Philco 40-120C Filament Wiring
BTW, someone had replaced the original 20uF/20uF filter cap with a 47uF/33uF cap. Do you think these values are safe on ...bluecap — 04:33 PM
Philco 40-120C Filament Wiring
You're correct. I was misinterpreting the key position. I now know where it is, and things are making sense. I appreciat...bluecap — 04:29 PM
Philco 40-120C Filament Wiring
I think Morzh has a good thought. Check the key position. The under chassis diagram in the Philco info shows an “H” for ...klondike98 — 04:25 PM
Philco 630csx power cord
Yes, the third wire goes to the stud on the side and is separate from the other two. I've usually used cloth covered ...Tynwald — 03:09 PM
New member
Have you tried Alabama Historical Radio Society? They possibly could recommend someone. I remember a name of Dee Hanes...morzh — 03:08 PM

[-]
Who's Online
There are currently no members online.

>