Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Yet another Maggie-Vox
#3

Looks like it'll have to be a 181. I just had a quick look at it this afternoon, and there is a transformer of some sort next the 6L6's. There are two speakers. One 6L6 appears to be original, with the RCA Radiotron stamp on the base.

I have the prewar Magnavox book, and when I get a chance to catch my breath, I'm going to study the set. I believe that this has the same chassis as my prewar Regency, which I re-capped a few years ago. They surely did put out some nice stuff. I'm anxious to get into that chassis.

The Buick is back home now, but the transmission connections to the radiator are a hopeless mess. That's the fault of the guy who installed the radiator a while back. There is a transmission cooler on each side of the radiator (It's a cross-flow), and BOTH coolers were connected to the trans cooler lines, originally. The guy took a short cut, and used only one side. that was the beginning of a major fiasco, which I have to get straightened out now.

I'm also anxious to get into the Philco 37-650 sets, and get them performing properly. The one that we had in Detroit was a wonderful radio, especially for the price that father paid for it. I've never heard the phonograph model......heck, this one is only the second one I've ever seen! I plan on getting pictures of all three of those sets. There is no phono model in your book. In fact, there isn't a "B" model either...(?).

Now, next question. Was there a chairside version of the 37-650? In general chairside cabinets had smaller chassis in them because of the poor ventilation of that cabinet design. Can you just imagine the 15 tube Zenith chairside and the heat it must have put out?


Messages In This Thread
Yet another Maggie-Vox - by Doug Houston - 03-15-2011, 05:47 PM
Re: Yet another Maggie-Vox - by Ron Ramirez - 03-15-2011, 11:19 PM
Re: Yet another Maggie-Vox - by Doug Houston - 03-17-2011, 10:10 PM
Re: Yet another Maggie-Vox - by Ron Ramirez - 03-18-2011, 01:47 PM
Re: Yet another Maggie-Vox - by Doug Houston - 03-18-2011, 03:55 PM
Re: Yet another Maggie-Vox - by Ron Ramirez - 03-18-2011, 05:15 PM
Re: Yet another Maggie-Vox - by Doug Houston - 03-19-2011, 04:55 PM
Re: Yet another Maggie-Vox - by Doug Houston - 04-04-2011, 11:59 PM
Re: Yet another Maggie-Vox - by Ron Ramirez - 04-06-2011, 01:31 AM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM

[-]
Who's Online
There are currently 6898 online users. [Complete List]
» 2 Member(s) | 6896 Guest(s)
AvatarAvatar

>