An Introduction and a Philco 90 issue.
Posts: 806
Threads: 43
Joined: Dec 2008
City: Chicago, IL
The original caps were only 6 mFd. You really don't need much since there is both a dedicated filter choke and the speaker field coil.
Might you have connected the cap that just vented between one of the 80 plates and the resistor ?
Also check the resistance between that first terminal and the chassis.
Looks like you used all 1/2 watt resistors for replacements. Four of them should be 1 watt.
Check out this "before" photo of mine for reference. They are the big red ones on the left and one green/brown one on the right. (You can click on it for a bigger version).
[Image: https://live.staticflickr.com/65535/9118...0d8a_z.jpg]
(This post was last modified: 11-24-2021, 08:47 PM by Bob Andersen.)
Messages In This Thread
RE: An Introduction and a Philco 90 issue. - by Bob Andersen - 11-24-2021, 08:15 PM
Users browsing this thread: 18 Guest(s)
|
|
Recent Posts
|
|
91H Code 126 Restore
|
| Hi Nick,
Usually the dashed lines connected to components means the part is a substitute in the circuit for specific ...RodB — 09:42 AM |
|
462ron
|
| Mike when I got to the guy’s house to pick up the set, he gave me a tour of his home and garage. Wow, his living room co...462ron — 09:10 AM |
|
91H Code 126 Restore
|
| I'm pretty sure that the dotted line I circled in an earlier post signifies that it is applicable to the 226 model which...RealRider — 08:05 AM |
|
Philco 49-1040
|
| Hello bob,
that underside looks like it is all original !
Sincerely Richardradiorich — 02:07 AM |
|
Philco 49-1040
|
| Oh yes, many bumblebees and loktal tubes.
The cutout is for the speaker. Here's a photo from a different set.
Bob Andersen — 12:59 AM |
|
Philco 49-1040
|
| Bob;
Looks like another "Bumble Bee" special, like my Brand Z T.O radios. Is that section they took out of ...Arran — 12:19 AM |
|
Philco 49-1040
|
| Hello Bob,
You are like the home for lost tv's like how people bring pets home !
Sincerely Richardradiorich — 12:00 AM |
|
Philco 49-1040
|
| I thought I had an arrangement to restore this set for a customer but his wife said heck no. Instead, he gave it to me....Bob Andersen — 10:29 PM |
|
Philco 46-480 Electronic Restoration
|
| I kept working on reassembly this week. I wasn’t able to solder for a few days while it was too cold (single digit low t...jrblasde — 09:27 PM |
|
Atwater-Kent 84, restoration.
|
| Well, powering it up would be too good to be true, and I had that feeling.
Before I did, I decided to check the coils...morzh — 06:02 PM |
|
Who's Online
|
There are currently 5213 online users. [Complete List]
» 2 Member(s) | 5211 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
