Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1951 Chrysler radio
#22

I can confirm that the radio that was in the 1954 was built by Philco, some Chrysler products used Motorola built radios but not in these cars. Generally speaking the tubes should be fine, car radios were not used anywhere near as many hours as an AC set in the same era, the ones in the tubes in mine all tested close to brand new, the issue is going to be the paper caps if the set is going to be used for any length of time, age is killing those. My car has the four wheel drum brakes, only the Crown Imperial models got the Ausco-Lambert disk brakes as standard, the limousines also had 12 volt electrics but I'm not sure when that started. The disk brakes don't work like the ones were are used to, they work more like a clutch plate, and are actually self actuating, kind of like the shoes on a brake drum. https://www.web.imperialclub.info/Repair...ambert.htm
 My car has the two speed Powerflyte, I think the late 1953s was the first year, two forward, and one reverse. Also has the power steering, the pump runs off of a shaft coming out of the back of the generator. This was not an unusual arrangement, G.M and Ford cars used similar layout back in the 1950s.
Regards
Arran


Messages In This Thread
1951 Chrysler radio - by mwiedmer - 04-22-2023, 06:07 PM
RE: 1951 Chrysler radio - by GarySP - 04-22-2023, 06:13 PM
RE: 1951 Chrysler radio - by mwiedmer - 04-22-2023, 06:43 PM
RE: 1951 Chrysler radio - by David - 04-22-2023, 08:17 PM
RE: 1951 Chrysler radio - by NostalgiaRadioTime - 04-22-2023, 08:21 PM
RE: 1951 Chrysler radio - by mwiedmer - 04-22-2023, 08:29 PM
RE: 1951 Chrysler radio - by Chas - 04-22-2023, 10:16 PM
RE: 1951 Chrysler radio - by mwiedmer - 04-23-2023, 02:58 PM
RE: 1951 Chrysler radio - by Arran - 04-23-2023, 03:44 PM
RE: 1951 Chrysler radio - by mwiedmer - 04-23-2023, 04:40 PM
RE: 1951 Chrysler radio - by NostalgiaRadioTime - 04-23-2023, 06:13 PM
RE: 1951 Chrysler radio - by mwiedmer - 04-23-2023, 06:44 PM
RE: 1951 Chrysler radio - by Chas - 04-23-2023, 09:51 PM
RE: 1951 Chrysler radio - by mwiedmer - 04-23-2023, 10:01 PM
RE: 1951 Chrysler radio - by fenbach - 04-23-2023, 11:43 PM
RE: 1951 Chrysler radio - by Chas - 04-24-2023, 09:17 AM
RE: 1951 Chrysler radio - by radiorich - 04-24-2023, 09:19 AM
RE: 1951 Chrysler radio - by mwiedmer - 04-25-2023, 04:41 AM
RE: 1951 Chrysler radio - by radiorich - 04-25-2023, 08:05 AM
RE: 1951 Chrysler radio - by fenbach - 04-26-2023, 07:47 PM
RE: 1951 Chrysler radio - by mwiedmer - 04-26-2023, 07:57 PM
RE: 1951 Chrysler radio - by Arran - 04-27-2023, 12:48 AM
RE: 1951 Chrysler radio - by Chas - 04-27-2023, 11:21 AM
RE: 1951 Chrysler radio - by mwiedmer - 04-27-2023, 02:33 PM
RE: 1951 Chrysler radio - by Chas - 04-27-2023, 09:22 PM
RE: 1951 Chrysler radio - by mwiedmer - 04-28-2023, 09:40 PM
RE: 1951 Chrysler radio - by Chas - 04-30-2023, 03:37 PM
RE: 1951 Chrysler radio - by Antipodal - 04-30-2023, 10:11 PM
RE: 1951 Chrysler radio - by Chas - 05-01-2023, 08:24 AM
RE: 1951 Chrysler radio - by mwiedmer - 05-01-2023, 04:57 PM



Users browsing this thread: 7 Guest(s)
[-]
Recent Posts
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM
The list of my radio & TV collection!
Thanks Richard. I hope you enjoy it. Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM
The list of my radio & TV collection!
Hello RadioSvit, first all happy new year ! I will watch your new videos this week. Sincerely Richardradiorich — 09:19 AM

[-]
Who's Online
There are currently 8984 online users. [Complete List]
» 2 Member(s) | 8982 Guest(s)
AvatarAvatar

>