[Jordanbkc]

After y'all talked about the power transformer, I checked it out.  Primary on A side terminals 1-2 is 5.4 ohms.   3-4 and 8-9 are .1 ohms   5-6 is 138 ohms, 6-7 146 ohms (both a little low). 

I got around to soldering the power cable on, and the caps in the Bakelite box.

I sat awhile trying to figure out how I was going to replace the part 4 capacitor that's hidden under the wax antenna tubes.  One end you can clip and solder a wire, the other you can't get to where it's attached to the A switch.  Don't want to move the sub-chassis.  Finally figured out there's a green wire under the switch that connects A2 to A10. A10 is much easier to reach. Might be longer, but I'm connecting it to A10.