Philco 37-61

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Philco 37-61

RodB
Phorum Expert

Posts: 1,072
Threads: 43
Joined: Feb 2015
City: Roseville, MN

#27

12-26-2023, 08:48 PM

It appears to me that block 46 has been relocated to the low position in the photo and the mystery block is in the upper spot. The power line is connected to the lower block.

The 20K and 51K voltage divider is connected to the upper block. Looking at the schematic, that point has part 16 (0.1 mfd) supplying screen voltage to two tubes. Part 16 is probably in the unknown block. I checked earlier for a service bulletin but couldn't find one. It looks like this configuration has been there awhile, can't explain why it's this way. You'll have to check the wiring to verify that point runs to the screen grids and the wiring for the other lug.

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Philco 37-61 - by 7chip7 - 12-11-2023, 09:04 PM

RE: Philco 37-61 - by Radioroslyn - 12-11-2023, 10:44 PM

RE: Philco 37-61 - by 7chip7 - 12-11-2023, 11:23 PM

RE: Philco 37-61 - by GarySP - 12-11-2023, 11:31 PM

RE: Philco 37-61 - by Radioroslyn - 12-12-2023, 01:11 AM

RE: Philco 37-61 - by 7chip7 - 12-12-2023, 11:18 AM

RE: Philco 37-61 - by klondike98 - 12-12-2023, 01:48 PM

RE: Philco 37-61 - by 7chip7 - 12-12-2023, 03:38 PM

RE: Philco 37-61 - by klondike98 - 12-13-2023, 02:01 PM

RE: Philco 37-61 - by MrFixr55 - 12-14-2023, 09:12 AM

RE: Philco 37-61 - by 7chip7 - 12-16-2023, 12:22 PM

RE: Philco 37-61 - by radiorich - 12-16-2023, 01:50 PM

RE: Philco 37-61 - by klondike98 - 12-16-2023, 05:44 PM

RE: Philco 37-61 - by 7chip7 - 12-18-2023, 11:27 AM

RE: Philco 37-61 - by 7chip7 - 12-18-2023, 11:47 AM

RE: Philco 37-61 - by David - 12-18-2023, 01:37 PM

RE: Philco 37-61 - by 7chip7 - 12-24-2023, 09:44 AM

RE: Philco 37-61 - by RodB - 12-24-2023, 10:33 AM

RE: Philco 37-61 - by Radioroslyn - 12-24-2023, 10:38 AM

RE: Philco 37-61 - by 7chip7 - 12-25-2023, 11:17 AM

RE: Philco 37-61 - by Radioroslyn - 12-25-2023, 03:03 PM

RE: Philco 37-61 - by RodB - 12-25-2023, 04:51 PM

RE: Philco 37-61 - by 7chip7 - 12-26-2023, 07:25 AM

RE: Philco 37-61 - by Radioroslyn - 12-26-2023, 10:17 AM

RE: Philco 37-61 - by 7chip7 - 12-26-2023, 11:29 AM

RE: Philco 37-61 - by Radioroslyn - 12-26-2023, 05:09 PM

RE: Philco 37-61 - by RodB - 12-26-2023, 08:48 PM

RE: Philco 37-61 - by 7chip7 - 12-27-2023, 08:08 AM

RE: Philco 37-61 - by 7chip7 - 12-30-2023, 08:22 AM

RE: Philco 37-61 - by Radioroslyn - 12-30-2023, 09:01 AM

RE: Philco 37-61 - by 7chip7 - 12-30-2023, 09:45 AM

RE: Philco 37-61 - by RodB - 12-30-2023, 09:49 AM

RE: Philco 37-61 - by 7chip7 - 12-30-2023, 02:03 PM

RE: Philco 37-61 - by 7chip7 - 12-30-2023, 04:30 PM

RE: Philco 37-61 - by RodB - 12-30-2023, 05:53 PM

RE: Philco 37-61 - by 7chip7 - 12-31-2023, 02:18 PM

RE: Philco 37-61 - by RodB - 01-01-2024, 12:03 PM

RE: Philco 37-61 - by Radioroslyn - 01-01-2024, 01:44 PM

RE: Philco 37-61 - by 7chip7 - 01-01-2024, 03:40 PM

37-61 Speaker Repair - by 7chip7 - 01-03-2024, 09:01 AM

View a Printable Version

Users browsing this thread: 5 Guest(s)

Recent Posts
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio. I replaced the electrolytic capacitors in both. I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM

Who's Online

There are currently 8771 online users. [Complete List]
» 3 Member(s) | 8768 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me