05-20-2024, 05:07 PM
Some questions-
1. Is the battery terminal strip (figure 2) the same thing as the catacomb frame assembly connecting strip (figure 3) in the service notes?
2. Note 16 says that there’s a neutralizing condenser between terminals 7 and 8 of the catacomb terminal board. I’m not seeing that on the chassis.
3. There is a wire connecting two of the posts under the connecting strip/terminal board that doesn’t appear to be factory installed. Can that be a work around for a non functioning circuit or a change of wiring to accommodate the ancient battery eliminator that’s in the battery box?
4. The lead seals are missing from the catacomb but the rosin appears untouched inside.
5. Does the row of wire resistors have to be removed if it’s necessary to get into the catacomb?
Sorry for all the questions. I don’t want to mess this up! Thanks. - Rob
1. Is the battery terminal strip (figure 2) the same thing as the catacomb frame assembly connecting strip (figure 3) in the service notes?
2. Note 16 says that there’s a neutralizing condenser between terminals 7 and 8 of the catacomb terminal board. I’m not seeing that on the chassis.
3. There is a wire connecting two of the posts under the connecting strip/terminal board that doesn’t appear to be factory installed. Can that be a work around for a non functioning circuit or a change of wiring to accommodate the ancient battery eliminator that’s in the battery box?
4. The lead seals are missing from the catacomb but the rosin appears untouched inside.
5. Does the row of wire resistors have to be removed if it’s necessary to get into the catacomb?
Sorry for all the questions. I don’t want to mess this up! Thanks. - Rob
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
