Working on Philco 46-350 radio

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Working on Philco 46-350 radio

Deathstryker
Junior Member

Posts: 22
Threads: 1
Joined: Jul 2011

#31

07-25-2011, 09:05 PM

Using the test point mentioned in the schematics for the 48-360, I tested voltage behind the R12 (2,200 Ohm) resistor which originally connected to the AC/DC switch and it read 163 volts! This seemed way too high so I used another meter and got the same voltage. I believe this is the voltage you mentioned that should be around 80/90 volts. I then moved my positive lead to pin 2 of 3Q5 (the brown wire that goes to the can capacitor) and got 0 voltage. This is the one that's suppose to be around 8.5 volts.

I get no sound out of it at all, btw.

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Working on Philco 46-350 radio - by Deathstryker - 07-08-2011, 07:27 AM

Re: Working on Philco 46-350 radio - by John R - 07-08-2011, 01:16 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-08-2011, 05:28 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-08-2011, 08:48 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-08-2011, 11:44 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-09-2011, 02:46 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-09-2011, 04:23 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-09-2011, 05:38 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-09-2011, 07:16 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-09-2011, 11:10 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-16-2011, 02:01 PM

Re: Working on Philco 46-350 radio - by Marsupial - 07-16-2011, 04:05 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-16-2011, 04:55 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-16-2011, 05:07 PM

Re: Working on Philco 46-350 radio - by Marsupial - 07-16-2011, 10:13 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-16-2011, 11:41 PM

Re: Working on Philco 46-350 radio - by Marsupial - 07-17-2011, 08:38 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-23-2011, 12:28 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-23-2011, 02:01 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-23-2011, 02:19 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-23-2011, 04:27 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-23-2011, 06:22 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-23-2011, 09:29 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-23-2011, 11:39 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-24-2011, 08:33 AM

Re: Working on Philco 46-350 radio - by codefox1 - 07-24-2011, 11:31 AM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-24-2011, 10:01 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-25-2011, 10:10 AM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-25-2011, 07:39 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-25-2011, 07:53 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-25-2011, 09:05 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-25-2011, 10:19 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-26-2011, 10:50 AM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-26-2011, 05:39 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 07-26-2011, 10:47 PM

Re: Working on Philco 46-350 radio - by codefox1 - 07-28-2011, 10:30 PM

Re: Working on Philco 46-350 radio - by Raleigh - 08-04-2011, 12:23 AM

Re: Working on Philco 46-350 radio - by Deathstryker - 08-04-2011, 12:02 PM

Re: Working on Philco 46-350 radio - by codefox1 - 08-05-2011, 05:26 AM

Re: Working on Philco 46-350 radio - by Deathstryker - 08-05-2011, 06:30 PM

Re: Working on Philco 46-350 radio - by Deathstryker - 08-06-2011, 10:19 PM

View a Printable Version

Users browsing this thread: 17 Guest(s)

Recent Posts
A Marconi model 86
Dan; I've seen some Marconi sets like that before, one was a console though I'm not sure if it was a model 86. It's a...Arran — 05:09 PM
An attempt to remove the Field Coil from a G speaker
Milkjug plastic? Whatever is chosen for the spider, the material must be compatible with popular adhesives... Th...Chas — 05:05 PM
An attempt to remove the Field Coil from a G speaker
Mike; I would not use plastic from a milk jug for a spider, first it's polyethylene/polypropylene which resists most ...Arran — 04:56 PM
Philco model 60
This is my thread on 60 from 2016. I had to rewind the osc coil, and I actually counted the turns and then rewound i...morzh — 03:34 PM
Philco model 60
Yes, Mark belongs to the same Michigan Antique Radio Club that I do. I suspect that the oscillator coil is in need of a ...Radios1340 — 03:10 PM
A Marconi model 86
Yeah. I am dreading the thought of what to do with all my consoles when I will no longer be able to move them around. I...morzh — 02:51 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Cool gadget, Buzz. I took me a couple of second to undestand that that oscillating thing makes the wire to spool correc...morzh — 02:50 PM
A Marconi model 86
My back hurts already, you could build a house with all the wood. PaulPaul Philco322 — 02:49 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Part 4 of this series now uploaded link below to anyone interested Buzz — 02:39 PM
Philco model 60
Welcome to the Phorum, Radios1340! The oscillator coil on the 60 is a common culprit. I just bought a 60B (June 1934) ...GarySP — 02:33 PM

Who's Online

There are currently 7442 online users. [Complete List]
» 3 Member(s) | 7439 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me