Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Restoring Philco 38-14
#2

Well, I climbed down off of that fence and decided to proceed with restoration.
I did experiment with the speaker.
I never did that before.
I fed 10V AC (from the Isol. xfmer and Variac) to the outnput xfmer, and heard the hum.
Then I connected a 9V battery across that coil and the hum increased a bit.
Putting a Neodimium magnet inside the VC did not change the percepted loudness.

Anywho, I also found a 38-12 speaker with half cone in my stash. I might get it re-coned.
Or I might hunt down a 38-14 speaker. I have seen one listed as 38-12 one, but somehow sith the FC resistance of 2.5K, which tells me it might be 38-14 one. It is on that Play THings of the Past site, so this is why I was asking about it.


So. The radio was repaired before, and it was in 50s, because the parts (Black beauty and some other non-Philco tubulars) are mostly not original. The elctrolytics are also tubuilars: the originals were removed and discarded.
Because of that, after making sure all RF coils (other than the IF; I did not check it, never do), I decided to proceed with the restoration, but with a lighter version of it: I will be replaacing the parts directly, without trying to restuff and such. The reason is, I would have to find all original things, and I am not sure I want to do this. So, the radio will be flaunting bright yellow caps inside, should someone ever be interested enough to look there. As well as the aluminum radial Panasonic electrolytic caps.

Most resistors seem good as they are. All tubes are good and strong.
Maybe in Kutztown I might be able to get another junker with a good speaker.
Plus there is auction in Oct in my town; who knows what that might offer....

To be continued.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Restoring Philco 38-14 - by morzh - 09-09-2024, 07:04 PM
RE: Restoring Philco 38-14 - by morzh - 09-14-2024, 04:49 PM
RE: Restoring Philco 38-14 - by morzh - 09-15-2024, 09:30 PM
RE: Restoring Philco 38-14 - by morzh - 09-28-2024, 07:40 PM
RE: Restoring Philco 38-14 - by morzh - 09-28-2024, 09:35 PM
RE: Restoring Philco 38-14 - by morzh - 09-29-2024, 09:04 PM
RE: Restoring Philco 38-14 - by morzh - 09-30-2024, 10:23 PM
RE: Restoring Philco 38-14 - by radiorich - 10-01-2024, 12:25 AM
RE: Restoring Philco 38-14 - by morzh - 10-01-2024, 08:07 AM
RE: Restoring Philco 38-14 - by radiorich - 10-01-2024, 08:45 AM
RE: Restoring Philco 38-14 - by RodB - 10-01-2024, 10:01 AM
RE: Restoring Philco 38-14 - by morzh - 10-01-2024, 11:11 AM
RE: Restoring Philco 38-14 - by morzh - 10-01-2024, 09:15 PM
RE: Restoring Philco 38-14 - by radiorich - 10-02-2024, 09:43 AM
RE: Restoring Philco 38-14 - by morzh - 10-04-2024, 09:42 PM
RE: Restoring Philco 38-14 - by radiorich - 10-05-2024, 12:42 AM
RE: Restoring Philco 38-14 - by RadioSvit - 10-05-2024, 02:55 AM
RE: Restoring Philco 38-14 - by MrFixr55 - 10-05-2024, 08:13 AM
RE: Restoring Philco 38-14 - by morzh - 10-05-2024, 02:01 PM
RE: Restoring Philco 38-14 - by morzh - 10-05-2024, 08:52 PM
RE: Restoring Philco 38-14 - by morzh - 10-05-2024, 08:55 PM
RE: Restoring Philco 38-14 - by radiorich - 10-05-2024, 09:28 PM
RE: Restoring Philco 38-14 - by morzh - 10-05-2024, 09:57 PM
RE: Restoring Philco 38-14 - by radiorich - 10-06-2024, 03:38 PM
RE: Restoring Philco 38-14 - by morzh - 10-06-2024, 10:15 PM
RE: Restoring Philco 38-14 - by radiorich - 10-06-2024, 10:33 PM
RE: Restoring Philco 38-14 - by morzh - 10-07-2024, 08:56 AM
RE: Restoring Philco 38-14 - by morzh - 10-07-2024, 07:48 PM
RE: Restoring Philco 38-14 - by Paul Philco322 - 10-07-2024, 09:20 PM
RE: Restoring Philco 38-14 - by morzh - 10-07-2024, 09:25 PM
RE: Restoring Philco 38-14 - by morzh - 10-07-2024, 09:28 PM
RE: Restoring Philco 38-14 - by MrFixr55 - 10-07-2024, 10:57 PM
RE: Restoring Philco 38-14 - by Arran - 10-08-2024, 12:28 AM
RE: Restoring Philco 38-14 - by morzh - 10-08-2024, 08:54 AM
RE: Restoring Philco 38-14 - by RadioSvit - 10-08-2024, 01:52 PM
RE: Restoring Philco 38-14 - by morzh - 10-08-2024, 04:02 PM
RE: Restoring Philco 38-14 - by Paul Philco322 - 10-08-2024, 07:52 PM
RE: Restoring Philco 38-14 - by radiorich - 10-09-2024, 01:25 AM
RE: Restoring Philco 38-14 - by morzh - 10-09-2024, 08:22 AM
RE: Restoring Philco 38-14 - by RodB - 10-09-2024, 12:09 PM
RE: Restoring Philco 38-14 - by morzh - 10-09-2024, 01:14 PM
RE: Restoring Philco 38-14 - by MrFixr55 - 10-09-2024, 09:11 PM
RE: Restoring Philco 38-14 - by morzh - 10-09-2024, 10:49 PM



Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM
6TPZ and 5TPO Radio Help
I suspect it's been repaired before. And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM
B&K 1077B no video
Thanks Rich! I'll take a look and see what he has. I know there's more modern equipment to be had, but this one I know a...TV MAN — 09:11 PM
B&K 1077B no video
Hello Tim, Here is a link to restoration of one on Phil's old radios site ! Sincerely Richard bk1077bradiorich — 09:01 PM
6TPZ and 5TPO Radio Help
I'm a little befuddled on this one. Should X5 and X4 be tied together like this?  It looks like someone added this at so...R3Sons — 07:33 PM

[-]
Who's Online
There are currently no members online.

>