Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Old Victor caps need values
#7

Thanks Carl it comes very close indeed.. The model you have led me to is model 330..On the schematics that I have it shows a portion [in dotted lines ]which is model 331, and it states that this is the one with the phono. The schematics are the same BUT it does not tell me the value of the caps,nor does it tell me the part numbers..
Don't get me wrong ,,you have been a help,at lease I have more to work with.It looks like the service data is the same as my radio,so I copied it ..
Since this is an old schematic and I am not well versed in reading them I can't find the variable tuning caps on the schematic.. Of course I know they are there but they are not printed the same as the newer schematics.I am trying to trace the wires to the caps and matching up everything so I can figure out the value of the caps.
I will be using 630 volt caps,except the electrolytics which will be 450 volts
All of the tubes test good and the radio does play [with a lot of hum].
Well it is nice to have you guys reply and help me ,I just hope I can do my part on this one...Thanks again Dan

   Living in Calgary Alberta


Messages In This Thread
Old Victor caps need values - by Dan Walker - 08-25-2011, 10:29 PM
Re: Old Victor caps need values - by codefox1 - 08-26-2011, 08:19 AM
Re: Old Victor caps need values - by Carl Travis - 08-26-2011, 09:53 AM
Re: Old Victor caps need values - by Dan Walker - 08-26-2011, 11:07 AM
Re: Old Victor caps need values - by codefox1 - 08-26-2011, 12:50 PM
Re: Old Victor caps need values - by Carl Travis - 08-26-2011, 03:53 PM
Re: Old Victor caps need values - by Dan Walker - 08-26-2011, 11:58 PM
Re: Old Victor caps need values - by Carl Travis - 08-27-2011, 08:21 AM
Re: Old Victor caps need values - by Dan Walker - 08-27-2011, 10:45 AM
Re: Old Victor caps need values - by codefox1 - 08-27-2011, 09:03 PM
Re: Old Victor caps need values - by Dan Walker - 08-30-2011, 07:02 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM

[-]
Who's Online
There are currently no members online.

>