Replacing electrolytic cans with E-caps for 40-180?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Replacing electrolytic cans with E-caps for 40-180?

planigan
Member

Posts: 119
Threads: 5
Joined: Mar 2006
City: Coram, N.Y. 11727

#12

07-24-2006, 11:50 PM

Jun, try using the 1" plastic pipe. If you align it right you can epoxy the top that you cut off to the end of the pipe and then slide it into the can and push down top, that should leave it stable and you can use the metal tape over it. If the bottom is aluminium (I thought it was plastic/bakelite/phenol) you could drill a hole innit and bolt a terminal lug through it to use as your ground, otherwise you will have to put the bolt through the side somewhere. You can't solder to the aluminium. Pat

Find

« Next Oldest | Next Newest »

Messages In This Thread

Replacing electrolytic cans with E-caps for 40-180? - by jslim22 - 07-12-2006, 12:27 AM

Replacing electrolytic cans with e-caps 40-180 - by planigan - 07-12-2006, 02:13 AM

Thanks - by jslim22 - 07-14-2006, 12:59 PM

[No subject] - by planigan - 07-16-2006, 10:29 PM

Stuffing the can? - by jslim22 - 07-19-2006, 03:11 PM

[No subject] - by 49Stude63 - 07-19-2006, 03:23 PM

Electrolytic stuffing. - by planigan - 07-19-2006, 11:59 PM

Stuffing cans - by planigan - 07-20-2006, 12:26 AM

Thanks to both - by jslim22 - 07-23-2006, 02:09 AM

Electorlytic Stuffing - by planigan - 07-23-2006, 11:33 PM

Cutting the wrong end of the cap - by jslim22 - 07-24-2006, 11:10 PM

Cutting the wrong end of cap - by planigan - 07-24-2006, 11:50 PM

Hi Pat - by jslim22 - 07-27-2006, 10:02 AM

[No subject] - by planigan - 07-27-2006, 12:22 PM

Thanks as always - by jslim22 - 07-28-2006, 03:38 PM

View a Printable Version

Users browsing this thread: 4 Guest(s)

Recent Posts
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio. I replaced the electrolytic capacitors in both. I have the SAMS m...R3Sons — 12:29 PM

Who's Online
There are currently no members online.