Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Radiobar 528
#1

I am a new member here, and have a question about a radiobar.When looking at the reference in Ron's radiobar research he has it listed as a model 528 37-620 which is confusing.The chassis in the radio has the tube line-up 80/6A7/78/75/78/42/42/42. It also has an oval dial with 4 band 8" speaker and shadowmeter. The radio has doors over the radio with what appears to be 4 chrome? strips on each side. What do I have? and what chassis is this? Thanks....Don


Messages In This Thread
Philco Radiobar 528 - by downtothewire - 10-27-2011, 07:22 PM
Re: Philco Radiobar 528 - by Ron Ramirez - 10-27-2011, 07:34 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 7053
Thread moved to test equipment section. (I have not used one of these)klondike98 — 07:05 AM
6TPZ and 5TPO Radio Help
Thank you Richard.R3Sons — 01:37 AM
6TPZ and 5TPO Radio Help
R3Sons, I buy my resistors from either digi key or mouser ! Sincerely Richardradiorich — 01:28 AM
Replicating (dogbone) resistors what method have you used ?
Hello Guys, Ican't wait to try printing some of these I might go ahead and order some from PCB way ! Sincerely Richa...radiorich — 01:26 AM
6TPZ and 5TPO Radio Help
Does anybody have a line on replacement resistors?R3Sons — 12:21 AM
42-345 Resistors
I replaced all the electrolytic capacitors. That big Philco 12uf 400V electrolytic Vienna sausage. is one I removed and ...proftrussell — 11:58 PM
6TPZ and 5TPO Radio Help
Well...taht's a start.morzh — 10:15 PM
6TPZ and 5TPO Radio Help
X6 is out. Only pulling 3mA now, 220mA with the light on. Test point 18 is 12.2 Test point 19 is 12.06R3Sons — 09:46 PM
Philco 7053
Any of you guys have and used this tester?Martinj — 09:27 PM
6TPZ and 5TPO Radio Help
I would test all, but the X6 is the main suspect. The output is the autotransformer, and it also could potentially ha...morzh — 09:13 PM

[-]
Who's Online
There are currently no members online.

>