Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 60 Part ID
#3

The center dot looks painted, you can see wrinkles around the edges of the center dot which I don't think would be there if it wasn't painted, then again they usualy tried to use a contasting shade of brown. So it is orange brown orange, or 31,000 micro micro farads (picofarad in new lingo) for the first one, and 610,000 MMF for the second, both are supposedly rated for 500 volts if I read them correctly. They don't look physically large enough to be that because those values are huge for a mica capacitor? If you divide 610,000 MMF by 10,000 that comes up as a .61 microfarad capacitor, maybe it's supposed to be 64 mmf (pf) cap and the other a 33 mmf cap? Are those on the schematic?
Regards
Arran


Messages In This Thread
Model 60 Part ID - by Caperodder - 11-03-2011, 04:54 PM
Re: Model 60 Part ID - by PhilcoMike - 11-04-2011, 09:02 AM
Re: Model 60 Part ID - by Arran - 11-05-2011, 11:30 PM
Re: Model 60 Part ID - by Caperodder - 11-06-2011, 08:24 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
91H Code 126 Restore
Well I'm making good progress. All the bakelite blocks have been recapped.  I found that using a heat gun and skinny ...RealRider — 02:35 PM
Philco model 60
>>and found that the field coil is bad. Should be 1140 ohms, tests at 1.1k ohms. You have one stringent crit...morzh — 02:07 PM
Philco model 60
Yes I was there. I got some real bargains there. Plus a Zenith 7G605 clipper that I have been trying to find for a fair ...Radios1340 — 01:46 PM
The speaker table error?
G  10-1/2"       65, 76, 87, 95 Push-Pull 45's 2766 0.7 550 3200 H   10-1/2"    77, 96 Push-Pull...morzh — 09:26 PM
A Marconi model 86
I have a Stromberg, one of the early ones, seems early 30s. This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM
A Marconi model 86
A backbreaker.....PaulPaul Philco322 — 08:12 PM
A Marconi model 86
>>What a behemoth! A Juggernaut.morzh — 07:47 PM
Philco 70 antenna lead
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM
A Marconi model 86
:e_biggrin: What a behemoth!  I hope the final result is as much a quality sounding example!  Keep us posted on your pro...GarySP — 07:32 PM
A Marconi model 86
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM

[-]
Who's Online
There are currently no members online.

>