Model 80 Ant., I.F. Transformer, and Coil SPEC sheets
Posts: 220
Threads: 56
Joined: Oct 2011
City: Lompoc CA
http://www.flickr.com/photos/trog8/
Added a diagram of looking at the bottom of the chassis and the coils. It has what i measured. Digital/Analog
Messages In This Thread
Re: Model 80 Ant., I.F. Transformer, and Coil SPEC sheets - by Bradley Rush - 11-08-2011, 05:38 PM
Users browsing this thread: 3 Guest(s)
|
Recent Posts
|
91H Code 126 Restore
|
Well I'm making good progress.
All the bakelite blocks have been recapped. I found that using a heat gun and skinny ...RealRider — 02:35 PM |
Philco model 60
|
>>and found that the field coil is bad. Should be 1140 ohms, tests at 1.1k ohms.
You have one stringent crit...morzh — 02:07 PM |
Philco model 60
|
Yes I was there. I got some real bargains there. Plus a Zenith 7G605 clipper that I have been trying to find for a fair ...Radios1340 — 01:46 PM |
The speaker table error?
|
G 10-1/2" 65, 76, 87, 95
Push-Pull 45's
2766
0.7
550
3200
H 10-1/2" 77, 96
Push-Pull...morzh — 09:26 PM |
A Marconi model 86
|
I have a Stromberg, one of the early ones, seems early 30s.
This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM |
A Marconi model 86
|
A backbreaker.....PaulPaul Philco322 — 08:12 PM |
A Marconi model 86
|
>>What a behemoth!
A Juggernaut.morzh — 07:47 PM |
Philco 70 antenna lead
|
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM |
A Marconi model 86
|
:e_biggrin: What a behemoth! I hope the final result is as much a quality sounding example! Keep us posted on your pro...GarySP — 07:32 PM |
A Marconi model 86
|
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM |
Who's Online
|
There are currently 5417 online users. [Complete List] » 1 Member(s) | 5416 Guest(s)
|
|
|

|