1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Linear Mode
PT-25 and 48-200 restoration
codefox1
Silent Key
*****
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
#2

01-24-2012, 04:11 PM
OK. please look at http://www.nostalgiaair.org/ go to resources philco, and get schematics for your radios. Make a parts list. If you have a problem come back. You will need to replace the electrolytic capacitors and all the wax coupling and bypass capacitors before you dare to fire it up again. Probably the small resistors too, since thay cost about a nickel apiece and aren't worth testing. If you don't have a stash, order one of everything in the set so you don't get stung with another shipping charge.

Do the simpler of the two first.

Always use an isolation transformer and a variac to safely bring these old sets back to life gradually. Do not ever touch the set whilst it is plugged in, but OK if clean dry knob, you can turn it.

Ask more questions.
Find
« Next Oldest | Next Newest »
Thread Closed


Messages In This Thread
PT-25 and 48-200 restoration - by winkydink - 01-24-2012, 02:48 PM
Re: PT-25 and 48-200 restoration - by codefox1 - 01-24-2012, 04:11 PM
Re: PT-25 and 48-200 restoration - by voroush - 02-01-2012, 02:49 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
91H Code 126 Restore
Just to make it more confusing here is another model 91 schematic that doesn't show parts with dotted lines in that spot...Arran — 10:37 PM
Atwater-Kent 84, restoration.
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct. So the c...morzh — 09:41 PM
An attempt to remove the Field Coil from a G speaker
Arran Yours probably then the H speaker, same as mine.morzh — 08:39 PM
An attempt to remove the Field Coil from a G speaker
Mike; I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM
91H Code 126 Restore
Thanks Arran, I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM
91H Code 126 Restore
As I was studying this schematic I was wondering what does this dotted line means?  I haven't traced it out yet. An o...RealRider — 07:22 PM
91H Code 126 Restore
When it comes to the cloth covered power cords, if they are not frayed, and are flexible, and if I can bend one without ...Arran — 06:21 PM
An attempt to remove the Field Coil from a G speaker
Could be. The central cylinder is OK, but the sides are...well. What's done is done. I wonder if some standard bobbine w...morzh — 06:02 PM
An attempt to remove the Field Coil from a G speaker
Mike; As I was saying it doesn't look like they used much of a bobbin for the field coil, not like a Magnavox one wou...Arran — 05:49 PM
Atwater-Kent 84, restoration.
This AK84 was bought, I think, last fall. For a whopping $100. It has been, according to the seller, restored. As I go ...morzh — 05:48 PM

[-]
Who's Online
There are currently 5608 online users. [Complete List]
» 1 Member(s) | 5607 Guest(s)
Avatar

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration