Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

HEY Ron
#8

(03-12-2012, 10:41 AM)BILL Wrote:  I got that portable I got from you, 39-72, playing ,turned out to be more of a job than I first thought it would be, All the tubes where burned out! someone must have use the wrong "A" voltage, but the original tubes where long and skinny, the replacements I had the cut down the base to get them to fit! Anyways Ive still was able to use the original tube shields and it plays great !It's surpriseing how good this little four tube sets can work

I know all about four tube battery sets, back when I started in Alberta farm battery radios were the least expensive way to get into 1930s radios. Not only have I found that many four tubers are excellent performers but I could usaully get them working with most if not all of the original capacitors left in place.
As for the tall skinny tublier battery tubes those seem to have been standard issue in most battery sets with 1.5 volt tubes from 1938 till sometime before the war, to me it looks like the same envelope that they used for many magic eye tubes. After the war they all used the shorter GT types with the metal band and later switched to the seven pin miniature types. If you keep looking you should be able to find a good set of the original style tubes, probably in a junker farm, or portable, or even one that isn't a junker but doesn't have the mechanical fit problems with the wider bases.
Regards
Arran



Messages In This Thread
HEY Ron - by BILL - 03-12-2012, 10:41 AM
RE: HEY Ron - by Ron Ramirez - 03-12-2012, 03:49 PM
RE: HEY Ron - by BILL - 03-13-2012, 09:44 AM
RE: HEY Ron - by Ron Ramirez - 03-13-2012, 10:01 AM
RE: HEY Ron - by Arran - 03-13-2012, 07:03 PM
RE: HEY Ron - by BILL - 03-13-2012, 06:36 PM
RE: HEY Ron - by Ron Ramirez - 03-13-2012, 07:17 PM
RE: HEY Ron - by Arran - 03-17-2012, 02:40 AM
RE: HEY Ron - by Arran - 03-13-2012, 07:25 PM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
462ron
Got it. Sounds easy enough that even I could do! :lol: Thanks Mike! Ron462ron — 09:00 AM
Philco 91 Tuning Condenser
Nope it was the metal part. I got that off. In fact I took the whole thing apart. Pretty easy.dconant — 08:54 AM
Philco 91 Tuning Condenser
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM
6TPZ and 5TPO Radio Help
This is what I meant. I would start from touching Test Point 12 on the sch. See if you hear hum.morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM

[-]
Who's Online
There are currently 4691 online users. [Complete List]
» 1 Member(s) | 4690 Guest(s)
Avatar

>