Philco 80 Jr, just starting....
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
hey Terry
Thanks for advice. No I don't want to change grid leak resistor, it is 11.4K i/o 10K, and I think it is fine the way it is; the cap is mica and is probably OK.
And the radio works, so it needs some tuning but nothing drastic.
Interesting, I used one of the original #36 tubes (another one was cooked, the filament's gone), and it did work, but I made a smart choice of buying two tested tubes, and, after the radio worked, I tried the original; it did work in the Det.-Osc. stage, I saw no difference in amplification, but it did not work in the Second detector (regenerative); I could barely hear anything.
Judging by sound, the Audio is OK.
Actually the grid leak is the 3 or 4 meg resistor in the grid circuit.
Terry
(This post was last modified: 03-21-2012, 07:08 PM by Radioroslyn.)
Messages In This Thread
RE: Philco 80 Jr, just starting.... - by 7estatdef - 03-21-2012, 07:07 PM
Users browsing this thread: 8 Guest(s)
|
Recent Posts
|
91H Code 126 Restore
|
Well I'm making good progress.
All the bakelite blocks have been recapped. I found that using a heat gun and skinny ...RealRider — 02:35 PM |
Philco model 60
|
>>and found that the field coil is bad. Should be 1140 ohms, tests at 1.1k ohms.
You have one stringent crit...morzh — 02:07 PM |
Philco model 60
|
Yes I was there. I got some real bargains there. Plus a Zenith 7G605 clipper that I have been trying to find for a fair ...Radios1340 — 01:46 PM |
The speaker table error?
|
G 10-1/2" 65, 76, 87, 95
Push-Pull 45's
2766
0.7
550
3200
H 10-1/2" 77, 96
Push-Pull...morzh — 09:26 PM |
A Marconi model 86
|
I have a Stromberg, one of the early ones, seems early 30s.
This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM |
A Marconi model 86
|
A backbreaker.....PaulPaul Philco322 — 08:12 PM |
A Marconi model 86
|
>>What a behemoth!
A Juggernaut.morzh — 07:47 PM |
Philco 70 antenna lead
|
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM |
A Marconi model 86
|
:e_biggrin: What a behemoth! I hope the final result is as much a quality sounding example! Keep us posted on your pro...GarySP — 07:32 PM |
A Marconi model 86
|
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM |
Who's Online
|
There are currently 7067 online users. [Complete List] » 1 Member(s) | 7066 Guest(s)
|
|
|

|