Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Into the fray with a 116X
#14

Hi Tom, yep, I did replace those 4 little 'lytics. I'll be going over the rest of the chassis when I decide to jump back in. I just have a problem understanding why it draws less than an amp at 90 volts but 3 amps at 122 volts. Doesn't seem like it could be a short as that would cause the amps to climb as soon as voltage was applied, even as low as 60 volts.

You know that old saying "Careful what you wish for,"? I thought "Heck, I'll grab a little ol AA5, something easy." So, I grabbed an RCA clock radio my son had given me. I should know better. I was not expecting the clock to be hard-wired to the chassis so of course the clock has to come out at the same time. OK. Then I discover they used those insidious one-way metal push on clips tp hold it in place. Not 2, not 3 or 4, but 5 of the bloody things. Now I gotta worry about breaking those 50+ year old plastic tabs. Criminy, time to get out the rum and lemonade.

Larry


Messages In This Thread
Into the fray with a 116X - by rocketeer - 03-26-2012, 05:00 PM
RE: Into the fray with a 116X - by TA Forbes - 03-26-2012, 05:32 PM
RE: Into the fray with a 116X - by rocketeer - 03-26-2012, 06:15 PM
RE: Into the fray with a 116X - by rocketeer - 03-27-2012, 09:29 PM
RE: Into the fray with a 116X - by Arran - 03-27-2012, 09:39 PM
RE: Into the fray with a 116X - by rocketeer - 03-27-2012, 11:11 PM
RE: Into the fray with a 116X - by LASJayhawk - 03-28-2012, 12:14 AM
RE: Into the fray with a 116X - by rocketeer - 03-28-2012, 09:11 AM
RE: Into the fray with a 116X - by Chuck Schwark - 03-28-2012, 09:54 AM
RE: Into the fray with a 116X - by rocketeer - 03-28-2012, 08:56 PM
RE: Into the fray with a 116X - by rocketeer - 04-06-2012, 09:32 PM
RE: Into the fray with a 116X - by rocketeer - 04-12-2012, 07:12 PM
RE: Into the fray with a 116X - by TA Forbes - 04-13-2012, 09:47 AM
RE: Into the fray with a 116X - by rocketeer - 04-13-2012, 07:26 PM
RE: Into the fray with a 116X - by Chuck Schwark - 04-13-2012, 09:21 PM



Users browsing this thread: 7 Guest(s)
[-]
Recent Posts
Philco model 60
>>and found that the field coil is bad. Should be 1140 ohms, tests at 1.1k ohms. You have one stringent crit...morzh — 02:07 PM
Philco model 60
Yes I was there. I got some real bargains there. Plus a Zenith 7G605 clipper that I have been trying to find for a fair ...Radios1340 — 01:46 PM
The speaker table error?
G  10-1/2"       65, 76, 87, 95 Push-Pull 45's 2766 0.7 550 3200 H   10-1/2"    77, 96 Push-Pull...morzh — 09:26 PM
A Marconi model 86
I have a Stromberg, one of the early ones, seems early 30s. This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM
A Marconi model 86
A backbreaker.....PaulPaul Philco322 — 08:12 PM
A Marconi model 86
>>What a behemoth! A Juggernaut.morzh — 07:47 PM
Philco 70 antenna lead
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM
A Marconi model 86
:e_biggrin: What a behemoth!  I hope the final result is as much a quality sounding example!  Keep us posted on your pro...GarySP — 07:32 PM
A Marconi model 86
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM
Philco 70 antenna lead
Yes, that wire will not pick up much interference as routed - the RF at that level won't be affected, and if you have st...radio1 — 07:26 PM

[-]
Who's Online
There are currently 7102 online users. [Complete List]
» 2 Member(s) | 7100 Guest(s)
AvatarAvatar

>