Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 90 Stuck At One Volume Level
#15

(04-14-2012, 09:34 PM)Pepperoni Wrote:  Shorted the wiper to chassis...Still have music and I also ran the VC thru it's full range just to see if anything happened. Nothing.

56.0 ohms from that cathode to chassis.

Bought the parts to put a new thermostat and housing gasket on the Ranchero. Decided to do it tomorrow. It was already 2pm. Sat on my butt the rest of the day. I don't usually do that. I'm not a TV person and I always need to be doing something. But I'm taking 5 days off from everything on the 20th and heading north to sit on my butt some more with my best friend. Haven't had a day off since the new year weekend.

Pepper

But you can tune? Or you cannot? If you cannot this pretty much means your Audio stage is your detector, and the RF amp, detectors etc don't do anything.

If you shorted the wiper to GND and it's still there - you can safely assume everything prior to this tube, and including this tube, is not doing much.

Do this: just yank the tube of that detector-amplifier.
Does it still play?
If it does, then yank the 1st AF 27.
And (hard to imagine, but) if it still does...there is nothing more to yank.
If it stops, there is no signal going from your Det. Amp to the 1st AF.

If you yank the det. and it stops playing - keep yanking in the opposite direction (towards the Antenna) until it stops playing.

Let's do that whole exercise first.


Messages In This Thread
Model 90 Stuck At One Volume Level - by Pepperoni - 04-12-2012, 04:54 PM
RE: Model 90 Stuck At One Volume Level - by morzh - 04-12-2012, 10:19 PM
RE: Model 90 Stuck At One Volume Level - by morzh - 04-14-2012, 03:44 PM
RE: Model 90 Stuck At One Volume Level - by morzh - 04-14-2012, 03:52 PM
RE: Model 90 Stuck At One Volume Level - by morzh - 04-14-2012, 07:16 PM
RE: Model 90 Stuck At One Volume Level - by morzh - 04-14-2012, 09:51 PM
RE: Model 90 Stuck At One Volume Level - by morzh - 04-15-2012, 01:04 PM
RE: Model 90 Stuck At One Volume Level - by morzh - 04-15-2012, 02:26 PM



Users browsing this thread: 7 Guest(s)
[-]
Recent Posts
91H Code 126 Restore
Well I'm making good progress. All the bakelite blocks have been recapped.  I found that using a heat gun and skinny ...RealRider — 02:35 PM
Philco model 60
>>and found that the field coil is bad. Should be 1140 ohms, tests at 1.1k ohms. You have one stringent crit...morzh — 02:07 PM
Philco model 60
Yes I was there. I got some real bargains there. Plus a Zenith 7G605 clipper that I have been trying to find for a fair ...Radios1340 — 01:46 PM
The speaker table error?
G  10-1/2"       65, 76, 87, 95 Push-Pull 45's 2766 0.7 550 3200 H   10-1/2"    77, 96 Push-Pull...morzh — 09:26 PM
A Marconi model 86
I have a Stromberg, one of the early ones, seems early 30s. This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM
A Marconi model 86
A backbreaker.....PaulPaul Philco322 — 08:12 PM
A Marconi model 86
>>What a behemoth! A Juggernaut.morzh — 07:47 PM
Philco 70 antenna lead
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM
A Marconi model 86
:e_biggrin: What a behemoth!  I hope the final result is as much a quality sounding example!  Keep us posted on your pro...GarySP — 07:32 PM
A Marconi model 86
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM

[-]
Who's Online
There are currently 6969 online users. [Complete List]
» 1 Member(s) | 6968 Guest(s)
Avatar

>