Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

37-610 semi fixed condensors
#5

Take a nice clear shot of the RF section when you get the set. These appear to be trimmers, but are not mentioned in the alignment instructions on the ARF scan of the Riders on this set. Agree, probably OK. I'd leave them be until after the restoration is done and see if alignment goes well.

You can get a much better schematic and notes set from Chuck's site
http://www.philcorepairbench.com/schematics.htm


Messages In This Thread
37-610 semi fixed condensors - by Philcofan - 05-13-2012, 06:52 PM
RE: 37-610 semi fixed condensors - by TA Forbes - 05-13-2012, 06:56 PM
RE: 37-610 semi fixed condensors - by Philcofan - 05-13-2012, 07:00 PM
RE: 37-610 semi fixed condensors - by morzh - 05-13-2012, 08:03 PM
RE: 37-610 semi fixed condensors - by codefox1 - 05-14-2012, 12:45 PM
RE: 37-610 semi fixed condensors - by 7estatdef - 05-14-2012, 06:06 PM
RE: 37-610 semi fixed condensors - by Ron Ramirez - 05-14-2012, 08:13 PM
RE: 37-610 semi fixed condensors - by Philcofan - 05-17-2012, 07:07 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
The speaker table error?
G  10-1/2"       65, 76, 87, 95 Push-Pull 45's 2766 0.7 550 3200 H   10-1/2"    77, 96 Push-Pull...morzh — 09:26 PM
A Marconi model 86
I have a Stromberg, one of the early ones, seems early 30s. This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM
A Marconi model 86
A backbreaker.....PaulPaul Philco322 — 08:12 PM
A Marconi model 86
>>What a behemoth! A Juggernaut.morzh — 07:47 PM
Philco 70 antenna lead
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM
A Marconi model 86
:e_biggrin: What a behemoth!  I hope the final result is as much a quality sounding example!  Keep us posted on your pro...GarySP — 07:32 PM
A Marconi model 86
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM
Philco 70 antenna lead
Yes, that wire will not pick up much interference as routed - the RF at that level won't be affected, and if you have st...radio1 — 07:26 PM
Philco model 60
I'm also a member of MARC. Did you attend the Vintage Electronics Expo in Waterford, MI last month? That's where I got...GarySP — 07:22 PM
A Marconi model 86
Dan Double conversion is using two IF converters instead of one. This improves the image response. morzh — 07:15 PM

[-]
Who's Online
There are currently no members online.

>