Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

WHICH 690 IS BEST BET?
#6

I think that $3700 is definately at the higher end of the price range for a 37 or even a 38-690, quite frankly I have never heard of one selling for that much although the Estes Auction may have. Compared to the 37 and 38-116 they are rare in that production was in the lower four digits compared to five digits with the 116s, for a top of the line high tube count set they seem to have had rather high production numbers and apparently also had a high survival rate. There are rarer sets in both the 1937 and 1937 Philco line, but that doesn't make them more desirable just more interesting.
To be brutally honest, I think if someone has to charge $1500 to electrically restore even one of these they they either don't know what they are doing or they are shaking down their customers. In all honesty unless they are doing something like fabricating a new power supply/amplifier chassis from scratch where is the $1500 going?
The same goes with the refinishing aspect, unless the cabinet has to be virtually rebuilt form the ground up, in fact most shops would go out of business charging such prices for a simple refinishing job. When it comes right down to it even a -690 cabinet is just a box, a larger box but a box none the less, the value of the actual radio really does not come into play here with restoration costs, it's straight labor and materials.
Regards
Arran


Messages In This Thread
WHICH 690 IS BEST BET? - by Sam samuelian - 06-13-2012, 07:31 AM
RE: WHICH 690 IS BEST BET? - by codefox1 - 06-13-2012, 02:01 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-13-2012, 04:41 PM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 06-13-2012, 04:50 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-13-2012, 09:32 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-14-2012, 12:57 AM
RE: WHICH 690 IS BEST BET? - by 7estatdef - 06-14-2012, 03:59 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-14-2012, 08:45 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-14-2012, 09:41 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-15-2012, 07:51 PM
RE: WHICH 690 IS BEST BET? - by Jayce - 06-15-2012, 08:00 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-15-2012, 09:35 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-16-2012, 03:01 AM
RE: WHICH 690 IS BEST BET? - by Jayce - 06-16-2012, 03:44 PM
RE: WHICH 690 IS BEST BET? - by codefox1 - 06-16-2012, 11:41 PM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 06-19-2012, 01:09 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-20-2012, 05:40 AM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 07-20-2012, 04:45 AM
RE: WHICH 690 IS BEST BET? - by PhilcoJohn - 07-20-2012, 07:10 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 07-20-2012, 10:26 PM
RE: WHICH 690 IS BEST BET? - by Arran - 07-21-2012, 11:11 PM
RE: WHICH 690 IS BEST BET? - by Arran - 07-22-2012, 07:22 AM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 07-22-2012, 08:14 AM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 07-22-2012, 10:56 AM
RE: WHICH 690 IS BEST BET? - by Arran - 07-22-2012, 10:51 PM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
462ron
Got it. Sounds easy enough that even I could do! :lol: Thanks Mike! Ron462ron — 09:00 AM
Philco 91 Tuning Condenser
Nope it was the metal part. I got that off. In fact I took the whole thing apart. Pretty easy.dconant — 08:54 AM
Philco 91 Tuning Condenser
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM
6TPZ and 5TPO Radio Help
This is what I meant. I would start from touching Test Point 12 on the sch. See if you hear hum.morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM

[-]
Who's Online
There are currently 2763 online users. [Complete List]
» 1 Member(s) | 2762 Guest(s)
Avatar

>