Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Garbled sound on Philco 46-131
#9

I would substitute a known good speaker/output transformer to rule them out or not.

Agree that miswired loops, open antenna coils can do same, but can be eliminated by working backwards from loudspeaker to antenna to isolate problem. Well, that's how I was taught all those decades ago.

Always try to post schematic or link if you can. Some of us old f**ts can nail it in 10 seconds. Not me, I take much longer.


Messages In This Thread
Garbled sound on Philco 46-131 - by markskala - 03-28-2012, 05:50 PM
RE: Garbled sound on Philco 46-131 - by Arran - 03-28-2012, 08:00 PM
RE: Garbled sound on Philco 46-131 - by 7estatdef - 03-28-2012, 08:12 PM
RE: Garbled sound on Philco 46-131 - by markskala - 03-28-2012, 09:22 PM
RE: Garbled sound on Philco 46-131 - by Arran - 03-28-2012, 11:14 PM
RE: Garbled sound on Philco 46-131 - by markskala - 03-29-2012, 05:01 AM
RE: Garbled sound on Philco 46-131 - by markskala - 03-30-2012, 10:54 PM
RE: Garbled sound on Philco 46-131 - by baarf - 07-18-2012, 11:08 AM
RE: Garbled sound on Philco 46-131 - by codefox1 - 07-18-2012, 01:35 PM
RE: Garbled sound on Philco 46-131 - by TA Forbes - 07-19-2012, 06:04 AM
RE: Garbled sound on Philco 46-131 - by codefox1 - 07-20-2012, 07:28 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
The speaker table error?
G  10-1/2"       65, 76, 87, 95 Push-Pull 45's 2766 0.7 550 3200 H   10-1/2"    77, 96 Push-Pull...morzh — 09:26 PM
A Marconi model 86
I have a Stromberg, one of the early ones, seems early 30s. This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM
A Marconi model 86
A backbreaker.....PaulPaul Philco322 — 08:12 PM
A Marconi model 86
>>What a behemoth! A Juggernaut.morzh — 07:47 PM
Philco 70 antenna lead
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM
A Marconi model 86
:e_biggrin: What a behemoth!  I hope the final result is as much a quality sounding example!  Keep us posted on your pro...GarySP — 07:32 PM
A Marconi model 86
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM
Philco 70 antenna lead
Yes, that wire will not pick up much interference as routed - the RF at that level won't be affected, and if you have st...radio1 — 07:26 PM
Philco model 60
I'm also a member of MARC. Did you attend the Vintage Electronics Expo in Waterford, MI last month? That's where I got...GarySP — 07:22 PM
A Marconi model 86
Dan Double conversion is using two IF converters instead of one. This improves the image response. morzh — 07:15 PM

[-]
Who's Online
There are currently no members online.

>