Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 46E - Testing Tubes
#4

Hi Dave,

I am sure you then would know how to build a suitable supply. I forgot that was rated for 220V but I recall only the ballast tube was different. A type 3 was used in the 220 volt set and a type 2 for 110 volts. Of course finding the correct 110 ballast tube would be as difficult as finding 14 and 17 tubes for it. Fortunately 110 to 220 volt transformers are easy to find. The biggest problem I had building a supply for my AK 41 was getting a filter choke with enough impedence and a big enough current rating. I don't play it hours at a time. I am using a filter choke out of an old TV that has a 250ma rating which is just at the limit so it gets a little warm after a while. My set uses five 112A and two 71-A tubes which draw 250 ma and a little more for plate current. With a simple pi filter, I only got 90 volts out of the supply so I use an isolation transformer with a voltage tap. That way, I can get it up to 115 volts DC. The only other DC set I had years ago was a Radiola 33DC with the matching 100B speaker and the optional legs. Sorry I sold it now.

Fred


Messages In This Thread
Philco 46E - Testing Tubes - by davemc - 05-18-2007, 11:07 AM
[No subject] - by Fred R - 05-21-2007, 12:44 PM
[No subject] - by davemc - 05-22-2007, 08:57 AM
[No subject] - by Fred R - 05-22-2007, 09:41 AM
[No subject] - by davemc - 05-22-2007, 11:58 AM
[No subject] - by Ron Ramirez - 05-26-2007, 11:47 AM
[No subject] - by davemc - 05-26-2007, 12:52 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM

[-]
Who's Online
There are currently 8736 online users. [Complete List]
» 2 Member(s) | 8734 Guest(s)
AvatarAvatar

>