Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Starting on a Model 20
#3

Thanks for the information to the website, Mr. Forbes. I've read enough of your posts to know that you've probably forgotten more about this old girl than I'll ever know!! Seems my initial assessment of this radio may have been a little critical. Other than the holes in the cabinet and one small piece of grillwork missing, it's not in bad shape for 80 years old. (I should be so lucky at that age!) No major problems jump out at me with the chassis. I did notice that it had a dial lamp, but no bulb, and is not on the schematic. Any idea what bulb it should have? It is also missing the tube shield for the 24's. If anyone has one laying around, I'd like to hear from you! The speaker is intact, but had some repairs made to the cone. I'll think about re-coning it down the road. I also noticed the resistors in the set don't have the color coding I expected to see. Just grey tubes with what looks like zinc castings on each end. I'm going to replace them and then start on the caps. Plenty of bakelites in there to rebuild, and the infamous tar can! Thank again. Gary.

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan


Messages In This Thread
Starting on a Model 20 - by GarySP - 01-17-2013, 04:10 PM
RE: Starting on a Model 20 - by TA Forbes - 01-18-2013, 01:38 AM
RE: Starting on a Model 20 - by GarySP - 01-18-2013, 09:23 AM
RE: Starting on a Model 20 - by Ron Ramirez - 01-18-2013, 12:54 PM
RE: Starting on a Model 20 - by GarySP - 01-18-2013, 02:46 PM
RE: Starting on a Model 20 - by TA Forbes - 01-18-2013, 09:35 PM
RE: Starting on a Model 20 - by GarySP - 01-20-2013, 10:11 PM
RE: Starting on a Model 20 - by GarySP - 01-21-2013, 12:07 PM
RE: Starting on a Model 20 - by GarySP - 01-24-2013, 10:31 PM
RE: Starting on a Model 20 - by TA Forbes - 01-25-2013, 12:48 AM
RE: Starting on a Model 20 - by Joe - 01-26-2013, 11:53 AM
RE: Starting on a Model 20 - by GarySP - 01-29-2013, 11:38 AM



Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
Philco model 60
This is my thread on 60 from 2016. I had to rewind the osc coil, and I actually counted the turns and then rewound i...morzh — 03:34 PM
Philco model 60
Yes, Mark belongs to the same Michigan Antique Radio Club that I do. I suspect that the oscillator coil is in need of a ...Radios1340 — 03:10 PM
A Marconi model 86
Yeah. I am dreading the thought of what to do with all my consoles when I will no longer be able to move them around. I...morzh — 02:51 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Cool gadget, Buzz. I took me a couple of second to undestand that that oscillating thing makes the wire to spool correc...morzh — 02:50 PM
A Marconi model 86
My back hurts already, you could build a house with all the wood. PaulPaul Philco322 — 02:49 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Part 4 of this series now uploaded link below to anyone interested Buzz — 02:39 PM
Philco model 60
Welcome to the Phorum, Radios1340!  The oscillator coil on the 60 is a common culprit.  I just bought a 60B (June 1934) ...GarySP — 02:33 PM
Philco model 60
Yes, standard alignment procedure. I can get the minuscule tone to vary when adjusting the trimmers. But you almost have...Radios1340 — 01:40 PM
A Marconi model 86
An imposing-looking radio, for sure.morzh — 12:43 PM
Philco model 60
Model 60 struck again :lol: Welcome to the Phorum! Above is the article on Model 60. Could be of some use. Now...morzh — 12:38 PM

[-]
Who's Online
There are currently 7615 online users. [Complete List]
» 2 Member(s) | 7613 Guest(s)
AvatarAvatar

>