Securing 38-1 chassis in its cabinet

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

classicradiorepair
Unregistered

#18

03-12-2013, 07:52 AM

Art - glad to see you finally found a cabinet! Here are a few crappy cell phone pics of the speaker and (what I presume to be the original) mounting setup on my 38-1. The chassis is held in with wooden blocks and a bolt from the bottom rear of the chassis... that's it!

[Image: http://decoradios.org/ftp/tillichn/philco381_1.jpg]

[Image: http://decoradios.org/ftp/tillichn/philco381_2.jpg]

[Image: http://decoradios.org/ftp/tillichn/philco381_3.jpg]

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

RE: Securing 38-1 chassis in its cabinet - by classicradiorepair - 03-12-2013, 07:52 AM

Users browsing this thread: 3 Guest(s)

Recent Posts
Philco 91 Tuning Condenser
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM
6TPZ and 5TPO Radio Help
This is what I meant. I would start from touching Test Point 12 on the sch. See if you hear hum.morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM

Who's Online
There are currently no members online.