46-350 works too well

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

46-350 works too well

billp
Junior Member

Posts: 16
Threads: 5
Joined: Jan 2012

03-15-2013, 05:21 PM

OK, I've been doing some probing. I got a copy of the Riders schematic, 'cause all I had was the one from Philco, and as you've noted, the component designations are different. BrendaAnn, I found that I'd already replaced R17 and C20, and R3 checked out OK. I started to plan my attack on the 2nd IF can to see if R302 was open. It was going to be a bear to remove the cover, so I thought I'd just take a reading from the 2 wires (coming out of the can)going through that resistor (the white running to the volume control, and the green going to pin 4 of 1U5). I thought if the resistor (R302) was open, I wouldn't get much if any reading. Is my logic correct in this? In any event I got a reading of about 28K, which seemed reasonable (?).
All of the other resistors check out in spec.
So the AVC components seem to be OK. John I'm going to start investigating your other theory of a problem in the RF section.

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

46-350 works too well - by billp - 03-12-2013, 04:20 PM

RE: 46-350 works too well - by TA Forbes - 03-13-2013, 12:12 AM

RE: 46-350 works too well - by Raleigh - 03-13-2013, 12:48 AM

RE: 46-350 works too well - by billp - 03-13-2013, 08:05 AM

RE: 46-350 works too well - by BrendaAnnD - 03-13-2013, 08:22 AM

RE: 46-350 works too well - by Raleigh - 03-13-2013, 11:15 AM

RE: 46-350 works too well - by billp - 03-13-2013, 03:52 PM

RE: 46-350 works too well - by billp - 03-15-2013, 05:21 PM

RE: 46-350 works too well - by billp - 03-18-2013, 01:30 PM

RE: 46-350 works too well - by morzh - 03-18-2013, 01:50 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Philco 46-480 Electronic Restoration
It’s been too cold to solder in the garage the last couple of evenings, but it has allowed me more time to search for th...jrblasde — 07:23 PM
An attempt to remove the Field Coil from a G speaker
The part/tool you get from HD is inside the plastic, like in a bubble.RodB — 07:17 PM
An attempt to remove the Field Coil from a G speaker
Got it. Still did not get the "Bubble" part.morzh — 07:10 PM
An attempt to remove the Field Coil from a G speaker
No Mike. Clear plastic from the packaging of items you buy at Home Depot, the ones you can't open without a hack saw or ...RodB — 05:48 PM
Philco 89 indicator light.
Well thankfully that did not happen.Jim Dutridge — 05:21 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look!morzh — 02:39 PM
46-1201 Trip Switch Spring
I deleted the other thread, as it was duplicate and did not have the photo. Please proceed with this one.morzh — 02:37 PM
46-1201 Trip Switch Spring
Hello, first post here, bear with me. I've been electronically refurbishing a 46-1201 that I received from a relative. ...ConcernedFeller — 01:46 PM
An attempt to remove the Field Coil from a G speaker
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM

Who's Online

There are currently 9301 online users. [Complete List]
» 1 Member(s) | 9300 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me