03-29-2013, 11:20 PM
Here's the Transitone after a bit of cleaning. Unfortunately, it's badly faded except for one area on the left where some object must have protected it Perhaps I'll repaint it someday.
[Image: http://farm9.staticflickr.com/8538/86012...ff3d_c.jpg]
I also popped it open for a look inside and tested the CRT.
[Image: http://farm9.staticflickr.com/8395/86023...a73c_c.jpg]
It tests like new
[Image: http://farm9.staticflickr.com/8123/86012...e3bc_c.jpg]
I also found a shattered 25DN6.
[Image: http://farm9.staticflickr.com/8519/86023...0ddd_c.jpg]
I replaced it and powered it up with an isolation transformer and variac and got some signs of life. I think all it needs is a recap and it will work just fine.
[Image: http://farm9.staticflickr.com/8256/86023...0a25_c.jpg]
[Image: http://farm9.staticflickr.com/8538/86012...ff3d_c.jpg]
I also popped it open for a look inside and tested the CRT.
[Image: http://farm9.staticflickr.com/8395/86023...a73c_c.jpg]
It tests like new
[Image: http://farm9.staticflickr.com/8123/86012...e3bc_c.jpg]
I also found a shattered 25DN6.
[Image: http://farm9.staticflickr.com/8519/86023...0ddd_c.jpg]
I replaced it and powered it up with an isolation transformer and variac and got some signs of life. I think all it needs is a recap and it will work just fine.
[Image: http://farm9.staticflickr.com/8256/86023...0a25_c.jpg]