Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Buzzing between stations
#9

Probably the reason you hear the buzzing with the 18, but not the 20 or 80 junior is that the 18 has AVC while the 20 and 80 do not. When not tuned to a station, the 18 AVC line drops to 0 volts and the gain controlled stages are running flat out at maximum amplification. As soon as you tune to a station, the AVC voltage rises, reducing the gain and along with it the residual received RF noise level. The 20 and 80 with manual gain control do not automatically increase the amplification as you tune off a station, so the background noise level does not rise noticeably.

The 18 is also a much better receiver and has a lot more reserve gain than either the 20 or 80, so the off station background noise is more apparent than with the lower sensitivity sets.


Messages In This Thread
Buzzing between stations - by morzh - 04-02-2013, 09:00 PM
RE: Buzzing between stations - by BrendaAnnD - 04-02-2013, 09:24 PM
RE: Buzzing between stations - by 7estatdef - 04-03-2013, 08:16 AM
RE: Buzzing between stations - by BrendaAnnD - 04-03-2013, 09:53 AM
RE: Buzzing between stations - by morzh - 04-03-2013, 10:41 AM
RE: Buzzing between stations - by jerryhawthorne - 04-03-2013, 04:42 PM
RE: Buzzing between stations - by 7estatdef - 04-03-2013, 04:59 PM
RE: Buzzing between stations - by morzh - 04-03-2013, 11:05 PM
RE: Buzzing between stations - by Mondial - 04-04-2013, 03:48 PM
RE: Buzzing between stations - by morzh - 04-04-2013, 06:46 PM
RE: Buzzing between stations - by GarySP - 04-06-2013, 03:32 PM
RE: Buzzing between stations - by morzh - 04-06-2013, 04:30 PM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
The part/tool you get from HD is inside the plastic, like in a bubble.RodB — 07:17 PM
An attempt to remove the Field Coil from a G speaker
Got it. Still did not get the "Bubble" part.morzh — 07:10 PM
An attempt to remove the Field Coil from a G speaker
No Mike. Clear plastic from the packaging of items you buy at Home Depot, the ones you can't open without a hack saw or ...RodB — 05:48 PM
Philco 89 indicator light.
Well thankfully that did not happen.Jim Dutridge — 05:21 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look!morzh — 02:39 PM
46-1201 Trip Switch Spring
I deleted the other thread, as it was duplicate and did not have the photo. Please proceed with this one.morzh — 02:37 PM
46-1201 Trip Switch Spring
Hello, first post here, bear with me. I've been electronically refurbishing a 46-1201 that I received from a relative. ...ConcernedFeller — 01:46 PM
An attempt to remove the Field Coil from a G speaker
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM
An attempt to remove the Field Coil from a G speaker
Mike, give this site a look for your spider. Can't hurt. Take care and BE HEALTHY! -GaryGarySP — 12:41 PM

[-]
Who's Online
There are currently 10898 online users. [Complete List]
» 2 Member(s) | 10896 Guest(s)
AvatarAvatar

>