Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Growing up quick...with a 38-690xx Pics added.
#41

    SUCCESS! After obtaining a replacement choke (the Hammond, thanks Ron!) and installing it along with some tube socket cleaning this wonderful old guy came to life! Icon_biggrin Reception on all 5 bands. Voltages within specs. Transformers run nice and warm but not hot after an hour of playing. All three speakers work. One tweeter field coil runs rather warm but I've read this is a normal occurance. It definitely needs an alignment and it has a hum I can't seem to track down. Its not affected by the volume control which now works perfectly by the way. Bass response is a little lax but I suspect when the speaker is back in the cabinet that may change. This guy is LOUD too. I was lucky enough to come by a set of Philco 6L6G's that test over 90% and they are now happily living in the amp chassis.

Next up.. Alignment, track down that hum and then look at the tweeter wiring as I have read that the factory wired them wrong. Also gonna address the tweeter capacitor issue I have read about. Something to do with changing the value to increase frequency response? Any advice on these issues is greatly appreciated. I will get some pics up tonight or tomorrow.


Messages In This Thread
RE: Growing up quick...with a 38-690xx Pics added. - by badwaxcaps - 05-23-2013, 02:05 PM



Users browsing this thread: 12 Guest(s)
[-]
Recent Posts
New member
Hello all.  New member here. I bought a Predicta TV for my teenage son (who is into all things vintage, see attached pic...Jsmith5690 — 12:47 PM
Philco 46-480 Electronic Restoration
I’ve asked if they accept PayPal as payment so that I can contest it if the part doesn’t arrive.jrblasde — 12:46 PM
Philco 46-480 Electronic Restoration
Make sure th eperson who answered is not a scammer (lots of these there now) and the Trus A S, whoever they are and wher...morzh — 12:38 PM
Philco 40-120C Filament Wiring
I would disregard everything that is there now. I do not know who and when changed it. 1. Make sure that what you thi...morzh — 12:36 PM
Model 27-84 BUZZ?Humm?
Depends on the type of hum. SOme is made by outside devices. Try installing an X-cap (0.2-0.5uF) across the AC line, ...morzh — 12:23 PM
Philco 40-120C Filament Wiring
Thank you for your replies. That is the correct schematic and pin out diagram for the rectifier. The resistance acro...bluecap — 11:01 AM
Philco 46-480 Electronic Restoration
Late last night a guy reached out in response to my posting on the Antique Radio Forum and suggested I contact Trust Aut...jrblasde — 11:01 AM
Philco 630csx power cord
Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM
Model 27-84 BUZZ?Humm?
I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM
Model 27-84 BUZZ?Humm?
Hello Bruce, First all do mean a 37-84b ? Did you take any before and after pictures ? is it a buzz like when you touch...radiorich — 01:59 AM

[-]
Who's Online
There are currently 2834 online users. [Complete List]
» 1 Member(s) | 2833 Guest(s)
Avatar

>