Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 620 bakelite block
#13

My friends:

I did not realize the firestorm this issue would produce. I rebuilt the block and it took me more than 3 minutes, but this was the first time around doing it. As to whether or not one should rebuild them is (in my opinion) is a choice, or preference, with either method being equally acceptable and correct. There is no need to throw stones at one another rather let us encourage each other in our endeavor. As to you old timers, please, you are our teachers and the ones who encourage us to undertake these tasks. Share what you can, don't let this talent die with you.

Now for two newbie dumb questions.

1. I am replacing a cap in the radio, one that a former repairer used to do away with part 30 2079, the 8 mfd - 8 mfd condenser. The new caps I have to replace it with are blue colored 10uf caps, with a with arrow and a minus sign in the arrow. Question, does this arrow mean that the direction pointed in is the negative side of the cap? Further, the negative ends of these new caps apparently are to be tied together as a common ground or negative side, correct?

2. I am replacing the part # 30 2118 condenser 16 mfd cap with a new blue 16uf cap. Can you give me some instructions on how to bypass the old can and put this new cap in? Thanks much, have a great day in the Lord.


In the Lord,


Dave


Messages In This Thread
Philco 620 bakelite block - by David B - 01-07-2008, 06:44 PM
[No subject] - by PhilcoPhil - 01-07-2008, 06:53 PM
Philco 620, bakelite blocks - by David B - 01-07-2008, 09:47 PM
[No subject] - by TonyJSenior - 01-08-2008, 07:39 AM
[No subject] - by 49Stude63 - 01-10-2008, 05:25 PM
Philco 620 - by David B - 01-10-2008, 07:47 PM
[No subject] - by 49Stude63 - 01-10-2008, 10:03 PM
[No subject] - by Texasrocker - 01-11-2008, 12:13 AM
[No subject] - by Ron Ramirez - 01-11-2008, 08:05 AM
Keep those blocks! - by AI2V - 01-11-2008, 11:07 AM
[No subject] - by Chris Drumma - 01-11-2008, 04:01 PM
[No subject] - by 49Stude63 - 01-11-2008, 04:03 PM
Bakelite Blocks - by David B - 01-11-2008, 08:38 PM
[No subject] - by 49Stude63 - 01-11-2008, 11:43 PM
Philco 620 - by David B - 01-12-2008, 12:50 AM
[No subject] - by Texasrocker - 01-12-2008, 01:47 AM
Philco 620 - by David B - 01-12-2008, 08:40 AM
Re: Philco 620 - by Ron Ramirez - 01-12-2008, 11:28 AM
[No subject] - by 49Stude63 - 01-12-2008, 01:16 PM
Philos 620 - by David B - 01-12-2008, 07:15 PM
[No subject] - by gary rabbitt - 01-17-2008, 04:46 AM



Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM

[-]
Who's Online
There are currently 10493 online users. [Complete List]
» 2 Member(s) | 10491 Guest(s)
AvatarAvatar

>