Model 65 alignment

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Model 65 alignment

tab10672
Senior Member

Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio

07-09-2013, 11:29 AM

I just finished a 65 chassis and besides the 3 screws behind the tuning assy there is nothing else to adjust, I can pick up low end stations left and right on the high end of the dial but the low end is dead from about 1000 down, it is like the low end has been moved up. when you tune down you can hear it cut out as if the power was turned off. would anyone have any suggestions of what to look for? All coils, caps, tubes and resistors are good or have been replaced. Thanks, Todd

(This post was last modified: 07-09-2013, 04:52 PM by tab10672.)

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Model 65 alignment - by tab10672 - 07-09-2013, 11:29 AM

RE: Model 65 alignment - by 7estatdef - 07-09-2013, 09:03 PM

RE: Model 65 alignment - by tab10672 - 07-09-2013, 11:05 PM

RE: Model 65 alignment - by 7estatdef - 07-10-2013, 07:18 AM

RE: Model 65 alignment - by tab10672 - 07-10-2013, 11:18 PM

RE: Model 65 alignment - by BrendaAnnD - 07-10-2013, 11:24 PM

RE: Model 65 alignment - by tab10672 - 07-10-2013, 11:35 PM

RE: Model 65 alignment - by BrendaAnnD - 07-11-2013, 12:41 AM

RE: Model 65 alignment - by Ron Ramirez - 07-11-2013, 05:47 AM

RE: Model 65 alignment - by tab10672 - 07-11-2013, 03:04 PM

View a Printable Version

Users browsing this thread: 3 Guest(s)

Recent Posts
6TPZ and 5TPO Radio Help
Sorry. The test points are as follows: 1 - 0v 2 - 0v 3 - 0v 4 - 12v 5 - 0v 6 - 11.9v 7 - 12v 8 - 12v 9 - 12v...R3Sons — 02:09 PM
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake :think: ) X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM

Who's Online

There are currently 3990 online users. [Complete List]
» 2 Member(s) | 3988 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me