Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Delco 32 volt console
#4

If it is a 32 volt set you may find it a disappointment performance wise given the small number of tubes, 32 volts was the plate and screen voltage as well. It looks like they used two power output tubes, probably 48s, to make up for the low B+ voltage somewhat, normally they would also add extra RF and IF amplifiers to help it out. The only 32 volt set that I saw in person was a post war set from the late 40s, I think it was a Sparton, it was identical to an AC/DC model of the same era other then the wiring and a large label on the back warning that it was a 32 volt only set, yes it had the typical "Hubble style" plug like a normal AC radio would have. By far most rural market sets in Canada used sets of A, B, and sometimes C batteries with the odd one using a 6 volt vibrator supply.
Unfortunately the garden variety battery sets were not immune from fools and other uninformed persons getting their hands on them, I have a Phonola downstairs where some idiot had twisted the remains of a molded plug on the end and tried plugging it in. I can't tell you how many I've seen where some dummy though it would be a good idea connecting one to a 12 volt car battery, if you are lucky enough they may have only tried connecting it to the B+ leads and only blew out the B- resistor
Regards
Arran


Messages In This Thread
Delco 32 volt console - by Jayce - 07-19-2013, 05:51 PM
RE: Delco 32 volt console - by Jayce - 07-19-2013, 09:44 PM
RE: Delco 32 volt console - by Arran - 07-20-2013, 02:01 AM
RE: Delco 32 volt console - by jerryhawthorne - 07-20-2013, 03:18 PM
RE: Delco 32 volt console - by Sean - 07-20-2013, 03:59 PM
RE: Delco 32 volt console - by Jayce - 07-20-2013, 05:09 PM
RE: Delco 32 volt console - by jerryhawthorne - 07-20-2013, 05:36 PM
RE: Delco 32 volt console - by Sean - 07-20-2013, 09:51 PM
RE: Delco 32 volt console - by Jayce - 07-21-2013, 04:48 PM
RE: Delco 32 volt console - by BrendaAnnD - 07-21-2013, 08:57 PM
RE: Delco 32 volt console - by Arran - 07-21-2013, 10:13 PM
RE: Delco 32 volt console - by codefox1 - 07-21-2013, 11:57 PM
RE: Delco 32 volt console - by BrendaAnnD - 07-22-2013, 01:51 AM
RE: Delco 32 volt console - by Jayce - 07-22-2013, 04:03 PM
RE: Delco 32 volt console - by Jayce - 09-23-2013, 09:50 PM
RE: Delco 32 volt console - by TA Forbes - 09-23-2013, 10:08 PM
RE: Delco 32 volt console - by BrendaAnnD - 09-23-2013, 11:26 PM
RE: Delco 32 volt console - by Arran - 09-24-2013, 12:51 AM
RE: Delco 32 volt console - by TA Forbes - 09-24-2013, 02:02 PM
RE: Delco 32 volt console - by marty - 09-24-2013, 02:20 PM
RE: Delco 32 volt console - by Jayce - 09-24-2013, 04:26 PM
RE: Delco 32 volt console - by marty - 09-24-2013, 05:07 PM
RE: Delco 32 volt console - by TA Forbes - 09-24-2013, 06:26 PM
RE: Delco 32 volt console - by Jayce - 09-24-2013, 07:56 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. The voltages are the same except #4....R3Sons — 09:29 PM
Philco 40-120C Filament Wiring
Let's try to sort it out. So we are working with the same info here's the schematic I have: ...and here's the pin o...klondike98 — 09:03 PM
Philco 630csx power cord
I posted this on FB but knowing that not all of us use social media, it seemed sensible to ask my question here.  I r...Tynwald — 08:07 PM
Philco 40-155
At last, got this working well. Impressed has really nice reception and tone. Had a bad connection on one of the capaci...rogerh — 07:44 PM
Philco 91 Restore Code ??
Or you could just square the current :lol: As for the values, they are dependent on the 1 or 2-speaker system. The...morzh — 05:46 PM
Philco 91 Restore Code ??
If you know the fc resistance you can use 120 ma nominal current through the resistor to get the voltage drop then calcu...RodB — 05:21 PM
Philco 91 Restore Code ??
Thanks Mike. I at least know why it is there if I don't fully understand it. I see where you talk about a cap and resist...dconant — 04:49 PM
Philco 91 Restore Code ??
Well, this cap you showed cannot possibly, due to the way it is constructed, be 1000pF (0.001). It can be in tens of pF....morzh — 03:13 PM
Philco 91 Restore Code ??
I have two schematics for this radio one shows the 47 block (126-226) and the other (121-221) does not. My radio does no...dconant — 02:32 PM
Philco 91 Restore Code ??
No, that cannot be the 47. The 47 is a regular backelite block cap. Look at the chassis picture, it is shown there. Rig...morzh — 01:45 PM

[-]
Who's Online
There are currently 2246 online users. [Complete List]
» 1 Member(s) | 2245 Guest(s)
Avatar

>