Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 623
#13

We are getting soooo far away from the original poster who seems to be new to old radios. If I were starting again from new, which I was 10 years ago, this would not be a radio I would try to get running. Yes, I have a couple of farm radios with the usual 90/1.5 voltage requirements and enjoyed building power supplies in a battery case. This radio is very different and would require a more complex supply. Even after my little experience, not something I would like to build.
Every once in while, one buys a radio that is just not cost effective to bring to life. I do believe with the experience he has, this is the case. Perhaps just clean it up and look at it. Nothing wrong with that as most of us have lots of radios we look at, after all, how many can you run at once?
Enjoy the hobby but I would look for another radio that catches your fancy that runs off of 110 and you can listen to as well as admire.

Jerry

A friend in need is a pest!  Bill Slee ca 1970.


Messages In This Thread
Philco 623 - by budibower - 07-24-2013, 09:53 PM
RE: Philco 623 - by 7estatdef - 07-25-2013, 08:11 AM
RE: Philco 623 - by codefox1 - 07-25-2013, 09:54 AM
RE: Philco 623 - by klondike98 - 07-25-2013, 02:13 PM
RE: Philco 623 - by 7estatdef - 07-25-2013, 05:11 PM
RE: Philco 623 - by jerryhawthorne - 07-25-2013, 07:08 PM
RE: Philco 623 - by Ron Ramirez - 07-25-2013, 07:15 PM
RE: Philco 623 - by jerryhawthorne - 07-25-2013, 07:25 PM
RE: Philco 623 - by 7estatdef - 07-25-2013, 08:51 PM
RE: Philco 623 - by marty - 07-25-2013, 09:17 PM
RE: Philco 623 - by 7estatdef - 07-25-2013, 09:37 PM
RE: Philco 623 - by marty - 07-25-2013, 09:52 PM
RE: Philco 623 - by jerryhawthorne - 07-25-2013, 10:20 PM
RE: Philco 623 - by budibower - 07-25-2013, 10:28 PM
RE: Philco 623 - by budibower - 07-25-2013, 10:38 PM
RE: Philco 623 - by marty - 07-25-2013, 11:29 PM
RE: Philco 623 - by Arran - 07-26-2013, 08:16 AM
RE: Philco 623 - by marty - 07-26-2013, 09:30 AM
RE: Philco 623 - by 7estatdef - 07-26-2013, 12:13 PM
RE: Philco 623 - by Bob Andersen - 07-26-2013, 02:30 PM
RE: Philco 623 - by budibower - 07-26-2013, 09:21 PM



Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently 9483 online users. [Complete List]
» 2 Member(s) | 9481 Guest(s)
AvatarAvatar

>