42-1008 power transformer

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

42-1008 power transformer

Jim Dutridge
Senior Member

Posts: 310
Threads: 59
Joined: Mar 2007
City: Toledo State, Province, Country: OH

08-21-2013, 11:37 AM

That depends on which chassis you have. If its just a 42-1008 then the part number is 32-8129 that has 2 seperate filament windings along with the rectifier filament. If its a code 121 or 122 then the transformer was changed to part number 32-8217 and only has 1 filament winding along with the one for the rectifier.

Throwing some numbers together, and figuring that you might have the code 122, I would say secondary of 350-0-350 volts at around 220ma. Rectifer filament 5v @ 2A and the other filament of 6.3v @ 2A minimum. I might be wrong on these figures and I'm sure others will chime in.

(This post was last modified: 08-21-2013, 12:07 PM by Jim Dutridge.)

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

42-1008 power transformer - by davidff - 08-21-2013, 10:22 AM

RE: 42-1008 power transformer - by Jim Dutridge - 08-21-2013, 11:37 AM

RE: 42-1008 power transformer - by davidff - 08-26-2013, 10:08 AM

RE: 42-1008 power transformer - by BrendaAnnD - 08-26-2013, 02:57 PM

RE: 42-1008 power transformer - by codefox1 - 08-26-2013, 03:20 PM

RE: 42-1008 power transformer - by davidff - 09-03-2013, 07:43 AM

RE: 42-1008 power transformer - by Eric T - 09-03-2013, 07:39 PM

RE: 42-1008 power transformer - by Eric T - 09-03-2013, 11:08 PM

RE: 42-1008 power transformer - by marty - 09-04-2013, 12:05 AM

RE: 42-1008 power transformer - by davidff - 09-04-2013, 05:41 PM

RE: 42-1008 power transformer - by Eric T - 09-04-2013, 10:34 PM

RE: 42-1008 power transformer - by davidff - 09-19-2013, 11:31 AM

View a Printable Version

Users browsing this thread: 4 Guest(s)

Recent Posts
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM

Who's Online

There are currently 6808 online users. [Complete List]
» 1 Member(s) | 6807 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me