Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Veneer Repair Walkthrough..
#6

   
   

Time for wood filler. I can't say enough good things about Timbermate. I've tried every wood filler under the sun. NONE of them work like this stuff. It's the first wood filler I've used that you cannot see when you are finished. It's good stuff.

First photo shows the veneer with a little Timbermate smeared on.

Second photo shows the filler after sanding. The idea is to sand off all of the filler, only leaving the cracks full. 400 grit and a sanding block were used.

The artist formerly known as Puhpow! 8)


Messages In This Thread
Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 02:44 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 02:51 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 02:55 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 03:01 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 03:06 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 03:09 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 03:14 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 03:16 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 03:22 PM
RE: Veneer Repair Walkthrough.. - by KCMike - 09-17-2013, 03:47 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 05:43 PM
RE: Veneer Repair Walkthrough.. - by EricS - 09-17-2013, 06:48 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-17-2013, 07:28 PM
RE: Veneer Repair Walkthrough.. - by klondike98 - 09-17-2013, 09:24 PM
RE: Veneer Repair Walkthrough.. - by Eric Adams - 09-17-2013, 11:28 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-18-2013, 07:18 AM
RE: Veneer Repair Walkthrough.. - by Eric T - 09-22-2013, 12:55 PM
RE: Veneer Repair Walkthrough.. - by Jamie - 09-22-2013, 01:16 PM
RE: Veneer Repair Walkthrough.. - by dustyshoes - 09-25-2013, 10:26 PM
RE: Veneer Repair Walkthrough.. - by Tom Hamilton - 11-18-2013, 02:57 PM
RE: Veneer Repair Walkthrough.. - by VntgRads - 11-18-2013, 10:15 PM
RE: Veneer Repair Walkthrough.. - by wireless - 11-19-2013, 03:42 PM



Users browsing this thread: 12 Guest(s)
[-]
Recent Posts
Philco 49-1040
Bob; Looks like another "Bumble Bee" special, like my Brand Z T.O radios. Is that section they took out of ...Arran — 12:19 AM
Philco 49-1040
Hello Bob, You are like the home for lost tv's like how people bring pets home ! Sincerely Richardradiorich — 12:00 AM
Philco 49-1040
I thought I had an arrangement to restore this set for a customer but his wife said heck no.  Instead, he gave it to me....Bob Andersen — 10:29 PM
Philco 46-480 Electronic Restoration
I kept working on reassembly this week. I wasn’t able to solder for a few days while it was too cold (single digit low t...jrblasde — 09:27 PM
Atwater-Kent 84, restoration.
Well, powering it up would be too good to be true, and I had that feeling. Before I did, I decided to check the coils...morzh — 06:02 PM
An attempt to remove the Field Coil from a G speaker
Thanks Chas, sure will give it a look!morzh — 03:39 PM
An attempt to remove the Field Coil from a G speaker
Mike, Lookup  murrayatuptown on ARF. Seems he has a dilemma with surplus field coils. Could get lucky and have what y...Chas — 01:26 PM
Atwater-Kent 84, restoration.
Hello Mike, I have not checked to see if my console has a fuse or not and far as sets go I have early 30s General Motor...radiorich — 11:25 AM
Atwater-Kent 84, restoration.
Ron I forgot, but when you said "phone number", I remembered, caus I usually remember how I act when I need...morzh — 11:12 AM
Atwater-Kent 84, restoration.
You have an extensive collection of Philcos, Mike! I’m always excited to see each new one. Agreed on the power supply fu...jrblasde — 10:50 AM

[-]
Who's Online
There are currently 4033 online users. [Complete List]
» 2 Member(s) | 4031 Guest(s)
AvatarAvatar

>