Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Found a Midwest Radio/Phono PICS ADDED
#6

Jerry,
Now that you mention it, I have been thinking about the dial. I think there may be a part missing. If I remember it correctly there was nothing in the center of the dial. I know it did not move when I tried turning the knob.
I also think the brown has been redone because the RM scan makes it look like the trim is shiny. Luckily there is a piece of the grille cloth still attached on the lower right inside the cabinet, so I hopefully can get a decent match.

I was going to remove the chassis, but the top left screw was going to be a problem as it is mounted on an angle and I couldn't reach all the way up to where the nut was on the back side.

As for the record player, from the underside it looked to be the same age as the rest of the components, so I think it is the original. Even if it isn't I don't mind. I just really like the looks of the set. And with two speakers and the 18 tube chassis it should sound really good.

The lady gave me her home phone as they are closed Tues & Wed. I think my friend with the p/u truck will be back in town tomorrow and we will go get it then. we discussed trying to put it in the back seat of my Caddy, but I am just getting over a bad back problem from a week ago, so didn't want to take a chance on messing it up again trying to wrestle that into the car. She said just call her and she would come down to the store and meet us.

Oh, I also got an Ohmite Little Devils resistor 5 drawer cabinet for $5 and she gave me an old clock for parts.

Gene

Gen


Messages In This Thread
RE: Found a Midwest Radio/Phono Console Today! - by Gene Pederson - 09-17-2013, 04:37 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM

[-]
Who's Online
There are currently 5036 online users. [Complete List]
» 4 Member(s) | 5032 Guest(s)
AvatarAvatarAvatarAvatar

>