Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-116 and Zenith 9S-262
#23

Radio is still magic. Internet is good, but prone to failure and does not, and likely never will have, anything like the total penetration of HF radio. Of course, the powers that be are doing everything they can to destroy terrestrial radio, using digital signals that purposely don't cover any more than (and often not even) the local market for the station. They've pretty much destroyed BCBDX, what with I-BLOCK, the addition of hundreds of low power nighttime licenses, the destruction of 'clear channels', and the fact that most all the stations you CAN still hear at night are running the same programming, e.g. Goerge Noorey and Rush Limbaugh. Virtually gone is the thrill of hearing interesting and diverse programming from all over the US, Canada and Mexico (and those were just the ones you could get on your pocket transistor!).

And now, the idiots want to turn off the analog altogether and go total digital on AM. Say goodbye, DX (or even 'local' reception outside the cities)


Messages In This Thread
Philco 37-116 and Zenith 9S-262 - by morzh - 09-07-2013, 02:46 PM
RE: Philco 37-116 and Zenith 9S-262 - by morzh - 09-07-2013, 04:26 PM
RE: Philco 37-116 and Zenith 9S-262 - by morzh - 09-07-2013, 04:56 PM
RE: Philco 37-116 and Zenith 9S-262 - by morzh - 09-07-2013, 04:56 PM
RE: Philco 37-116 and Zenith 9S-262 - by morzh - 09-11-2013, 11:59 AM
RE: Philco 37-116 and Zenith 9S-262 - by morzh - 09-13-2013, 03:14 PM
RE: Philco 37-116 and Zenith 9S-262 - by morzh - 09-14-2013, 05:03 PM
RE: Philco 37-116 and Zenith 9S-262 - by morzh - 09-15-2013, 04:59 PM
RE: Philco 37-116 and Zenith 9S-262 - by morzh - 09-21-2013, 07:29 PM
RE: Philco 37-116 and Zenith 9S-262 - by BrendaAnnD - 09-22-2013, 12:15 AM



Users browsing this thread: 6 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 10485 online users. [Complete List]
» 4 Member(s) | 10481 Guest(s)
AvatarAvatarAvatarAvatar

>