Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5

rca 810k1 capacitor ?s
#1

Hi. Im looking for a little help on this. I don't have a real lot of experience with these old radios. I took a break from working on the Cabinet of my 37-116 and tried to start on the capacitors on this RCA. it looks like someone previously changed out some capacitors and put a 15mfd electrolytic capacitor where the schematic says a .5 mfd non electrolytic capacitor should be. Is this possible and is there a reason why this would have been done. I have checked and rechecked the schematic and I don't think Im reading it wrong . Anybody have any thoughts .
Thanks


Messages In This Thread
rca 810k1 capacitor ?s - by MarkD - 09-23-2013, 03:54 PM
RE: rca 810k1 capacitor ?s - by morzh - 09-23-2013, 06:22 PM
RE: rca 810k1 capacitor ?s - by MarkD - 09-23-2013, 06:57 PM
RE: rca 810k1 capacitor ?s - by jerryhawthorne - 09-23-2013, 08:09 PM
RE: rca 810k1 capacitor ?s - by MarkD - 09-23-2013, 08:37 PM
RE: rca 810k1 capacitor ?s - by jerryhawthorne - 09-23-2013, 09:51 PM
RE: rca 810k1 capacitor ?s - by Chris Cusick - 09-30-2013, 06:01 PM
RE: rca 810k1 capacitor ?s - by MarkD - 09-30-2013, 06:56 PM
RE: rca 810k1 capacitor ?s - by Chris Cusick - 10-01-2013, 01:33 PM
RE: rca 810k1 capacitor ?s - by MarkD - 10-01-2013, 02:10 PM
RE: rca 810k1 capacitor ?s - by Chris Cusick - 10-01-2013, 02:49 PM
RE: rca 810k1 capacitor ?s - by MarkD - 10-05-2013, 11:29 PM
RE: rca 810k1 capacitor ?s - by Chris Cusick - 10-06-2013, 05:30 PM
RE: rca 810k1 capacitor ?s - by MarkD - 10-06-2013, 06:11 PM
RE: rca 810k1 capacitor ?s - by jerryhawthorne - 10-06-2013, 06:57 PM
RE: rca 810k1 capacitor ?s - by MarkD - 10-07-2013, 12:53 PM
RE: rca 810k1 capacitor ?s - by Chris Cusick - 10-07-2013, 02:00 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 5137 online users. [Complete List]
» 1 Member(s) | 5136 Guest(s)
Avatar

>