[49Stude63]

Normally I put the inline fuse holder mounted to the chassis (Radio shack types) that are open and you simply pop the fuse in. I use 1 amp fuses and never had too much a problem with them blowing but you can figure it out by checking your voltage and seeing how many watts it is rated at. Here is a site for conversions or or you can use Watts = Amps x Volts and do the proper math. So for a 45 watt unit with 120V home voltage equals about .375 Amp. Normally you will get a surge when turning it on but a 1 amp fust would normally handle that.