[Bradley Rush]

I have done testing as requested. I should have measured it first DUHHH. The color thru me to a bad place. It is 245 ohms one side to the volume on/off #20 the other to what I have assigned as TB3 PN A. That point after the 245 ohm is TB3 A is 340 ohms to ground, TB3 A is shorted to TB1 B where the Blk wire went from #30. the 70 ohm will be the one shown in the new pic I put up with a white arrow blk outline. Trying not to move anything til I do get my wire so if it breaks will replace. This pic is with most of the caps replaced. I'm awaiting wire and the resistors before finishing this one off.

http://s1289.photobucket.com/user/TROG99...3.jpg.html

All the notes are great. After looking at all the schematic's the AVC is modified. As you have shown Mr. Mondial.