Philco model 18 (code 121) - HELP!
Posts: 16,194
Threads: 562
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Either one will work fine I think.
The resistance is, I suspect, may not be of a high importance as, although I cannot find the spec on the field coil, I suspect its resistance is at least 10 times higher than that of the choke, and so the choke DC resistance will not affect voltages that much.
The inductance is good, and the ampacity is good too.
I'd go with the first one.
Messages In This Thread
RE: Philco model 18 (code 121) - HELP! - by morzh - 12-19-2013, 12:47 PM
Users browsing this thread: 41 Guest(s)
|
Recent Posts
|
Philco 91 Tuning Condenser
|
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM |
6TPZ and 5TPO Radio Help
|
This is what I meant.morzh — 08:37 PM |
6TPZ and 5TPO Radio Help
|
Here are the links. 6TPZ and 5TPO
The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM |
Philco 91 Tuning Condenser
|
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM |
Philco 91 Tuning Condenser
|
Hello,
Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM |
Eico 368 TV/FM Sweep Generator
|
Ron,
for the future:
In order to change the name of teh topic,
1. Go to the very first post.
2. Hit "Edit...morzh — 04:29 PM |
6TPZ and 5TPO Radio Help
|
Transistors are easy.
No converters. If you have input voltage, then just put some signal through.
Or touch your fin...morzh — 04:25 PM |
462ron
|
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM |
6TPZ and 5TPO Radio Help
|
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM |
6TPZ and 5TPO Radio Help
|
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM |
Who's Online
|
There are currently no members online. |
|
|