Philco Station setter info

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Philco Station setter info

gary rabbitt
Senior Member

Posts: 271
Threads: 12
Joined: Nov 2005
City: Nashville, TN

#13

06-03-2008, 06:13 PM

Hi guys,
I finally received the station setter.

Looks like it had not been altered. It has installed a 7A6 rectifier (instead of the 7Z4) and the 7A8
I see the 7A6 is wired like the 7Z4 would be.

Bad news is that there is a coil missing. As you can see on the other photo of the setter, there is a square coil mounted to the box, and the two caps are connected to the center tap of it.

I am not sure what the purpose of this coil would be looking at the diagram, shown in the red box.

Hopefully this is something that can be substituted. At least I know what the physical size of this coil is.
What part of the circuit is this coil for?

Thanks for your continued help on this box, as I'd like to recap it (restuff) and get it going.

Regards,
Gary.

[Image: http://antiqueradios.com/gallery/d/77921...erdiag.JPG]

[Image: http://antiqueradios.com/gallery/d/77929-1/coil.jpg]

[Image: http://antiqueradios.com/gallery/d/77927...r1_001.JPG]

[Image: http://antiqueradios.com/gallery/d/77925...r2_001.JPG]

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Philco Station setter info - by gary rabbitt - 05-18-2008, 02:27 AM

[No subject] - by Ron Ramirez - 05-19-2008, 11:25 PM

[No subject] - by Chuck Schwark - 05-20-2008, 09:17 AM

[No subject] - by Ron Ramirez - 05-20-2008, 06:26 PM

[No subject] - by Chuck Schwark - 05-20-2008, 07:33 PM

[No subject] - by exray - 05-20-2008, 09:09 PM

[No subject] - by gary rabbitt - 05-20-2008, 11:35 PM

[No subject] - by Ron Ramirez - 05-21-2008, 06:46 AM

[No subject] - by Chuck Schwark - 05-21-2008, 12:57 PM

[No subject] - by Chuck Schwark - 05-22-2008, 04:15 PM

[No subject] - by gary rabbitt - 05-27-2008, 12:33 AM

[No subject] - by Chuck Schwark - 05-27-2008, 10:48 AM

[No subject] - by gary rabbitt - 06-03-2008, 06:13 PM

[No subject] - by Chuck Schwark - 06-03-2008, 10:59 PM

[No subject] - by gary rabbitt - 06-04-2008, 02:37 AM

View a Printable Version

Users browsing this thread: 6 Guest(s)

Recent Posts
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM

Who's Online

There are currently 9963 online users. [Complete List]
» 2 Member(s) | 9961 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me