Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

47-1230 Capacitors
#31

Warren, I too can't get anything on SW. I think we need to put an actual SW antenna for that to happen.

How well are you receiving AM and FM? Also, are both band relatively the same loudness? Since you replaced the caps, it wouldn't be bad practice to check measurments, but assuming the sound is clear with no chirps or distortion, I assume you have it properly recaped so far.

Have you changed the line capacitors?

Follow the technical manual, there's a 20-ish step verification that can be done, if you're all near their numbers, go straight ahead with aligment.

Still, uncertain about SW.

-Mars


Messages In This Thread
47-1230 Capacitors - by Warren - 07-03-2013, 02:19 PM
RE: 47-1230 Capacitors - by exray - 07-04-2013, 06:27 AM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 11:26 AM
RE: 47-1230 Capacitors - by codefox1 - 07-04-2013, 11:38 AM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 06:15 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 06:28 PM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 07:07 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 07:54 PM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 08:00 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 08:15 PM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 09:04 PM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 10:51 PM
RE: 47-1230 Capacitors - by morzh - 07-05-2013, 12:20 PM
RE: 47-1230 Capacitors - by Warren - 07-08-2013, 01:46 PM
RE: 47-1230 Capacitors - by morzh - 07-08-2013, 08:11 PM
RE: 47-1230 Capacitors - by Warren - 07-08-2013, 08:44 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 01:45 PM
RE: 47-1230 Capacitors - by Chuck Schwark - 07-19-2013, 02:12 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 02:28 PM
RE: 47-1230 Capacitors - by codefox1 - 07-19-2013, 03:02 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 08:24 PM
RE: 47-1230 Capacitors - by BrendaAnnD - 07-19-2013, 09:18 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 11:37 PM
RE: 47-1230 Capacitors - by BrendaAnnD - 07-20-2013, 12:59 AM
RE: 47-1230 Capacitors - by Mondial - 07-20-2013, 09:02 AM
RE: 47-1230 Capacitors - by Warren - 07-20-2013, 05:02 PM
RE: 47-1230 Capacitors - by Mondial - 07-20-2013, 11:46 PM
RE: 47-1230 Capacitors - by Warren - 07-21-2013, 01:25 AM
RE: 47-1230 Capacitors - by Warren - 01-20-2014, 12:38 AM
RE: 47-1230 Capacitors - by Warren - 01-21-2014, 12:58 AM
RE: 47-1230 Capacitors - by Marsupial - 01-22-2014, 03:44 PM
RE: 47-1230 Capacitors - by Warren - 01-22-2014, 03:58 PM
RE: 47-1230 Capacitors - by Marsupial - 01-23-2014, 05:34 PM
RE: 47-1230 Capacitors - by Raleigh - 01-24-2014, 12:12 AM



Users browsing this thread: 6 Guest(s)
[-]
Recent Posts
Philco 91 Restore Code ??
I have changed the title of this thread from Philco 91 Schematic. I have gone through most of the cap replacements. I...dconant — 01:26 PM
462ron
Here is an online transistor substitution site… Ron462ron — 08:44 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a &quo...captainclock1988 — 12:55 AM
B&K 1077B no video
Hello Tim, I once had a Jcpenny 13inch tv /monitor built by NEC come into my repairshop it would start acting up at tim...radiorich — 10:59 PM
Restoring Philco 96
Mike; The last time I took a potted condenser can apart, and it was maybe 1/4 the size of the one in the model 96, I ...Arran — 10:56 PM
Compatible crts
Bob Andersen — 08:58 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a "...Arran — 08:41 PM
Restoring Philco 96
Have just aligned it. Surprisingly, it was not that much off at all. Barely. Aligning TRF sets is pure pleasue, as ther...morzh — 07:52 PM
6TPZ and 5TPO Radio Help
1 - 0v - correct 2 - 0v - correct 3 - 0v - --------------------- both 3 and 4 should be the same. Check L2 for being ope...morzh — 05:15 PM
B&K 1077B no video
I'm going to get back into it tonight. but I disconnected the 2 main resistors off this supply going to different parts ...TV MAN — 04:04 PM

[-]
Who's Online
There are currently 6194 online users. [Complete List]
» 2 Member(s) | 6192 Guest(s)
AvatarAvatar

>