Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Lets see..Buy the trim, you will need to cut the trim at a 45 degree angle at the corners so you will need a small miter box (you can get a small hobby miter box with a small razor saw at either home depot or a hobby shop for cheap), the you can measure and mark the trim on the inside of the miter and cut it with a miter saw for the 2 corners and a straight cut on the 2 ends, you might need some real fine sandpaper and steel wool to make the trim smooth then you will need to use some toner and then clear laquer after you color it. You will need some small finish nails and some wood glue. Put some glue on the inside of the trim and nail it in place with the small finish nails, I guess you might need a small hammer also if you dont have one.
supplies needed....
1. Trim
2. Miter box with saw.
3.#400 to 600 sandpaper and 0000 steel wool
4. wood glue
5. finish nails
6. small hammer
7. wood putty or grain filler to fill in the nail holes
I dont think I missed anything, this should get you there.
(This post was last modified: 02-24-2014, 04:30 PM by Warren.)
Messages In This Thread
RE: A 70 cabinet - by Warren - 02-24-2014, 04:29 PM
Users browsing this thread: 7 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Tuning Condenser
|
| Hello,
Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM |
|
Eico 368 TV/FM Sweep Generator
|
| Ron,
for the future:
In order to change the name of teh topic,
1. Go to the very first post.
2. Hit "Edit...morzh — 04:29 PM |
|
6TPZ and 5TPO Radio Help
|
| Transistors are easy.
No converters. If you have input voltage, then just put some signal through.
Or touch your fin...morzh — 04:25 PM |
|
462ron
|
| Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM |
|
6TPZ and 5TPO Radio Help
|
| Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM |
|
6TPZ and 5TPO Radio Help
|
| Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM |
|
Heathkit Sweep Generator TS-4
|
| Ron
Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM |
|
6TPZ and 5TPO Radio Help
|
| I am not a specialist in car radios.
I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM |
|
6TPZ and 5TPO Radio Help
|
| Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM |
|
462ron
|
| OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM |
|
Who's Online
|
There are currently 8878 online users. [Complete List]
» 3 Member(s) | 8875 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
