Posts: 239
Threads: 10
Joined: Dec 2013
City: Columbia, SC
I aligned the IF to more or less 5% of 260kc with my transmitter and several strong local stations. It didn't change much, it oscillates down to 950kc, so a little step in the right direction.
In the process I managed to somehow mess up the dial calibration by 20kc or so. I think I'm going to put this to the side for now, and look for an rf generator to do it correctly. In the meantime there's the cabinet and five more Philcos to work on
Messages In This Thread
RE: Model 89 Cathedral - by skyscraper - 02-27-2014, 02:58 PM
Users browsing this thread: 41 Guest(s)
|
Recent Posts
|
1930s Stewart-Warner Tombstone Radio need help identifying model number
|
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM |
Philco 91 Schematic
|
Hi Rod,
The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM |
Just got a 49-1613 need to know...everything!
|
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM |
B&K 1077B no video
|
Hello Tim,
I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ?
Sincerely Richardradiorich — 01:55 AM |
B&K 1077B no video
|
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM |
RCA 15X
|
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM |
B&K 1077B no video
|
Hello Tim,
I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!.
Sincerely...radiorich — 11:07 PM |
RCA 15X
|
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM |
Philco 91 Schematic
|
Hi Dan,
I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM |
6TPZ and 5TPO Radio Help
|
I suspect it's been repaired before.
And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM |
Who's Online
|
There are currently 10424 online users. [Complete List] » 1 Member(s) | 10423 Guest(s)
|
|
|
|