Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help! Philco knowledge required.
#5

Hi e.r.man -

As the others state, this is likely an export model or even a model made over there.

If you are good with schematics there are some US models with schematics available that incorporate some of the same tubes and probably some similar circuitry. Maybe you can hash these together and find your wiring problems?

Models 34 and 34-A
Models 38, 38-A
Model 39, 39-A
and lastly the 623

You can find these schematics at http://www.nostalgiaair.org

Also, in case you're not aware, there is a very good old radio forum in the UK operated by Paul Stenning. Odds are better than someone there could help you more than us Yanks on this model.

http://www.vintage-radio.net/forum/index.php

Good luck with it.

-Bill


Messages In This Thread
[No subject] - by englishradioman - 07-12-2008, 06:49 PM
[No subject] - by Michael Dennis - 07-12-2008, 08:41 PM
[No subject] - by Ron Ramirez - 07-12-2008, 09:10 PM
[No subject] - by exray - 07-12-2008, 10:10 PM
[No subject] - by Michael Dennis - 07-12-2008, 11:32 PM
[No subject] - by englishradioman - 07-13-2008, 09:53 AM
[No subject] - by Ron Ramirez - 07-13-2008, 11:31 AM
[No subject] - by englishradioman - 07-13-2008, 12:36 PM
[No subject] - by Michael Dennis - 07-18-2008, 10:36 PM
[No subject] - by englishradioman - 07-19-2008, 05:43 PM
[No subject] - by Michael Dennis - 07-19-2008, 08:27 PM
[No subject] - by exray - 07-20-2008, 07:09 AM
[No subject] - by englishradioman - 07-20-2008, 08:27 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM

[-]
Who's Online
There are currently 6839 online users. [Complete List]
» 2 Member(s) | 6837 Guest(s)
AvatarAvatar

>