Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Battery for 46-350
#13

Paul mentioned in a PM that he hadn't seen the guts of one of these batteries before. Here are some pics of the P-841-A for the 46-350.

The cellophane was fragile and tore easily. I've not seen one wrapped in cellophane before. I think the plug from the radio was just stuck through the cellophane into the connector. Note the cardboard on the end was just a loose shim.

[Image: http://i1328.photobucket.com/albums/w539...db9054.jpg]

This one has the end shim removed, showing the six cells of the "A" battery stacked together and stuck in place with tar. I think the cells are size F cells, about 1.5 times the length of a modern D cell, and about 1.2 mm larger diameter. From the white powder it looks like at least one of them corroded and leaked.

[Image: http://i1328.photobucket.com/albums/w539...3327c0.jpg]

The "B" battery is in the 2 boxes to the left of the "A" battery. Both are facing the same way, with the tar side toward the camera. Note the shim that covered the open end of the tar-packed cells. I think these are size A cells (not the same as the "A" battery). The A cells were just a tiny bit bigger diameter than modern AA cells, but are just 2.5 mm longer, about .1 inch. They fit in the same AA battery holders that we use, but are a little snug.

[Image: http://i1328.photobucket.com/albums/w539...6adea6.jpg]

John Honeycutt


Messages In This Thread
Battery for 46-350 - by Raleigh - 03-09-2014, 08:03 PM
RE: Battery for 46-350 - by RadioDave - 03-09-2014, 10:36 PM
RE: Battery for 46-350 - by Raleigh - 03-09-2014, 11:07 PM
RE: Battery for 46-350 - by WyTex - 03-11-2014, 07:41 AM
RE: Battery for 46-350 - by Raleigh - 03-16-2014, 03:15 PM
RE: Battery for 46-350 - by WyTex - 03-16-2014, 09:29 PM
RE: Battery for 46-350 - by Raleigh - 03-17-2014, 09:53 PM
RE: Battery for 46-350 - by WyTex - 03-19-2014, 11:49 AM
RE: Battery for 46-350 - by Raleigh - 03-19-2014, 04:04 PM
RE: Battery for 46-350 - by WyTex - 03-26-2014, 11:20 AM
RE: Battery for 46-350 - by Raleigh - 03-28-2014, 08:10 PM
RE: Battery for 46-350 - by Raleigh - 04-13-2014, 09:12 PM
RE: Battery for 46-350 - by Raleigh - 04-13-2014, 10:02 PM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM

[-]
Who's Online
There are currently no members online.

>